Pico Macom PIDA-1000 Manuals

PICO MACOM, INC. 12500 Foothill Blvd. • Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197 Installation And Operation Manual for PIDA-550, 750 and 1000 PIDA Doc. No.OM2964N-1 REV. B ECO 1769 Pro Series NTSC AUDIO/VIDEO BROADBAND DISTRIBUTION AMPLIFIER Model: MW57-02401250A I/P: AC120V 60Hz O/P: 24V 1250mA AC ADAPTOR AHEAD HON-KWANG PLUG IN CLASS 2 TRANSFORMER MODEL NO: D12-10-03 INPUT:120V 60Hz 25W OUTPUT: 26VAC 1.2A LISTED 69N0 UL E97199 ® -30dB TEST TWO-WAY BROADBAND DISTRIBUTION AMPLIFIER GAIN MAX RETURN PATH SLOPE FLAT FOWARD PATH GAIN MAX ATTENTION GAIN & SLOPE FACTORY SET TO MINIMUM MODEL: PIDA-550 PIDA-750 PIDA-1000 HPF LPF HPF LPF FA FA EQ FOWARD PATH RETURN PATH OUTPUT FORWARD INPUT FOWARD -30dB TEST 26VAC 1A 60Hz POWER PIDA 36/49 MHz SPLITTER

Installation and Operation Manual PIDA-1000 Braodband Bi-directional Push-Pull Distribution Amplifiers Operation Manual Rev. 06/03 Ph: 800-421-6511 www.picomacom.com PIDA-1000 Manual.qxd 6/29/04 11:08 AM Page 1

PICO MACOM, INC. PIDA Available in three forward bandwidth versions: 50-550MHz (CATV 2-78, 95- 99), 50-750MHz (CATV 2-117), and 50- 1000MHz (CATV 2-158) All versions feature reverse-path channel bandwidth 5-36MHz (Channels T7-T11) Adjustable 30dB forward-path gain and slope controls for optimal carrier-to- noise ratio, superior picture quality and easy system balancing Reverse-path gain passive or active mode selection via internal jumpers for maximum flexibility Active reverse-path adjustable 20dB gain control enables balancing of upstream signal ± 0.75dB flatness across band provides low distortion and excellent frequency response Employs dual state-of-the art push-pull hybrid technology for very low distor- tion, high input and output capability Optional plug-in equalizers and attenu- ators enable unity gain and slope sys- tem balancing for minimum distortion Optionally available in power-doubling version. -30dB input and output test points enable simplified setup and perform- ance monitoring without service interruption Shielded enclosure provides over 100dB RFI shielding performance reducing leakage and ingress thereby improving picture quality Built-in lightning and line-voltage surge protection protects the unit from damage Extruded aluminum heat-sink maxi- mizes heat dissipation for improved reliability and corrosion resistance Available in PAL configuration for international use External UL approved power supply The Pico Macom PIDA series two-way broadband distribution amplifiers are high quali- ty dual push-pull amplifiers producing forward and reverse signals with extremely low distortion and high output levels. These amplifiers are designed for bi-directional cable distribution systems used in institutional and MDU environments, which employ reverse path signals such as cable modems, remote status monitoring, and remote TV origina- tion. The PIDA also makes an excellent headend launch amplifier and is frequently used in conjunction with Pico Macom’s passive headend combiners (PHC12G or PHC24G) to overcome losses associated with signal combining in broadband CATV systems. Furthermore, the PIDA can be used in cable systems whose input source is a franchise cable drop or the output of a SMATV headend. In such applications, the PIDA would be used with Pico Macom’s CEF channel elimination filter for “mix-and-match” channel selection or for local insertion. The PIDA enclosure is made of high-grade aluminum to ensure reliable heat dissipation and corrosion resistance. Pico Macom backs up this product with its industry leading 5-year limited warranty. PIDA Series Broadband Bi-directional Push-Pull Distribution Amplifiers Broadband Bi-directional Push-Pull Distribution Amplifiers www.picomacom.com DISTRIBUTION Active Components 355 Parkside Drive San Fernando, CA 91340 Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433 B-1 Rev. 12/02 Series