Pico Macom TSMS-2150X-16A Manuals

PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197 Installation And Operation Manual 14V/18V SATELLITE MULTI-SWITCH TSMS-2150X-16A P/N: 911051 OM2275N-1 REV. C 10/20/00

Installation and Operation Manual TSMS-2150X-16A Rack-Mounted Satellite Multiswitch Operation Manual Rev. 08/03 Ph: 800-421-6511 www.picomacom.com

PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197 Installation And Operation Manual 14V/18V SATELLITE MULTI-SWITCH TSMS-2150X-16A P/N: 911051 OM2275N-1 REV. C 10/20/00

TSMS2150X Rack-Mounted Satellite Multiswitches www.picomacom.com Headend & Electronics 355 Parkside Drive San Fernando, CA 91340 Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433 A-71 Rev. 12/02 Series Pico Macom’s TSMS-2150X Series rack-mounted satellite multiswitches can be used in every SMATV application requiring satellite 950-2150MHz IF distri- bution. The easy mount enclosure and all rear panel connections provide for rack mounting or quick and easy wall mounting by simply turning the unit face to the wall. The TSMS-2150X-8AUV allows 2 LNB inputs and 1 off-air antenna input (40-806 MHz) and provides 8 outputs, while the TSMS-2150X-16A allows 2 LNB inputs and provides 16 outputs. The advanced circuit design incorporates a pin diode matrix to route any of the inputs to any of the outputs by utilizing the 13-14V Right-Circular/Vertical or 17-18V Left-Circular/Horizontal switching control supplied by the satellite receivers, thus eliminating digital artifacts that result from mechanical relay switching. To compensate for insertion loss, both versions use separate built-in amplifiers for satellite and/or VHF/UHF signals. The TSMS-2150X series, used with the external power supply, will supply power to the LNBs reducing heat build up within the multiswitch and prolong the life of the unit. Rack-Mounted Satellite Multiswitches TSMS2150X Series Wide frequency range (TSMS2150-16A 950-2150MHz; TSMS2150-8AUV 40-2150MHz) Simple interface design provides 2 satellite polarity inputs and 8 or 16 outputs, for quick installation All rear panel connection access allows rack or wall mount flexi- bility PIN diode matrix reduces polarity transfer time and digital artifacts providing consistent picture quality Polarity is selected by receiver supplied voltage (14V/18VDC) compatible with most DTH satellite services Antenna signal combines with satellite on output eliminating external combining, reducing cost and clutter 500 mA voltage power pass- through reduces cost by providing satellite receiver path for LNB power Built-in amplifier compensates for insertion losses reducing need of external amplification External UL Approved power supply reduces heat buildup thus increasing unit life