Pioneer TAD-CR1 Manuals

TAD Compact Reference TAD-CR1 SPEAKER SYSTEM Unpacking instructions 1. Cut the two packing straps on the outer carton, remove the “handle”- shaped packing joints (four places), and cut open the top flap. • To remove the packing joints, hold to the lever and pull outward. UP UP Straps Packing joints Top flap Tape Lever UP UP This speaker system is extremely heavy (46 kg, or 101.4 lb). Be sure to carry out unpacking and installation with at least two people. Trying to handle too much weight can throw you off balance, causing you to fall or otherwise incur bodily injury. Read before removing your speakers from their packaging. 2. Using a screwdriver, remove the bolts and washers (six in all) from the packaging and open and remove the outer carton. Bolts Outer carton 3. Remove the tape (six pieces in total) from the inner carton, and remove the inner carton. • After removing the inner carton and the top protector, take off the protective cover from the speaker system. After installation, the protective cover can also be used as a dust cover for the speaker. Inner carton Protective cover Inner carton Top protector Bottom protector Bottom lid