Planet Networking & Communication WNAP-7205 Manuals

Note – 1 – – 2 – – 3 – – 4 – 1. Package Contents 2. Installation Precautions 4. Hardware Installation WNAP-7205 Quick Guide CD-ROM PoE Injector Power Adapter 5GHz 802.11a/n Wireless Outdoor Access Point WNAP-7205 Thank you for choosing PLANET WNAP-7205. Before installing the AP, please verify the contents inside the package box. If there is any item missed or damaged, please contact the seller immediately. STEP 1: Push the latch in the bottom of WNAP-7205 to remove the sliding cover. STEP 2: Plug the RJ-45 Ethernet cable into the LAN Port of WNAP-7205. 3. Physical Introduction Rear Panel Description – LED Indication Rear Panel Description – Port & Connector 1. Users MUST use a proper and well-installed surge arrestor and grounding kit with WNAP-7205; otherwise, a random lightening could easily cause fatal damage to WNAP-7205. EMD (Lightning) DAMAGE IS NOT COVERED UNDER WARRANTY. 2. Users MUST use the “Power cord & PoE Injector” shipped in the box with the WNAP-7205. Use of other options will cause damage to the WNAP-7205. 3. Users MUST power off the WNAP-7205 first before connecting the external antenna to it; otherwise, damage might be caused to the WNAP-7205 itself. Power LED WAN Port LED LAN Port LED Wireless LED WAN Port (Connect to DSL/Cable Modem) LAN Port (Connect to PC via PoE Injector) RP-SMA Connector (Connect to External Antenna) Mounting Tie x 2 Protective Plug x 2