Planet WDAP-C1750 Manuals

1. Package Contents Note – 1 – – 2 – – 3 – – 4 – Hardware Description Thank you for choosing PLANET WDAP-C1750. Before installing the AP, please verify the contents inside the package box. "AP" is used as an alternative name of WDAP-C1750 in this Quick Installation Guide. The following items should be contained in the package: If there is any item missing or damaged, please contact the seller immediately. Step 1. Drill four holes in your ceiling using the mounting bracket as a guide, and insert the four screw anchors. Step 2. Align the mounting bracket with your screw anchors and use the four self-tapping screws to fix it into place. Step 3. Attach the AP to the mounting bracket by aligning the grooves in the AP. Step 4. Secure the AP firmly in place using the thumb screw. WDAP-C1750 Quick Installation Guide 1750Mbps 802.11ac Dual Band Ceiling-mount Wireless Access Point Quick Guide T-rail Mounting Kit Ceiling Mounting Kit Mounting Bracket with Thumb Screw WDAP-C1750 3. Hardware Installation 2. Physical Introduction Plastic spacer x 2 Long T-rail clip x 2 Short T-rail clip x 2 Long screw x 2 Short screw x 2 Self-tapping screw x 4 Screw anchor x 4 Reset: Press and hold the reset button on the access point for at least 10 seconds. IMPORTANT SAFETY PRECAUTIONS: This device requires professional installation. Ceiling Mount 1 2 3 4 1 2 3 T-rail To mount the AP to a T-rail, you need to select a T-rail clip whose size must go with the width of the T-rail. Please follow the instructions below and refer to Diagram 1 or 2. Diagram 1: Tight-fit installation Step 1. Attach the T-rail clips to the mounting bracket using the included two short screws. Step 2. Attach the AP to the mounting bracket by aligning it with the grooves in the AP. Step 3. Secure the AP firmly in place using the thumb screw. Step 4. Hang the AP onto the ceiling via T-rail with the assembled mounting bracket. T-rail Mount LAN/PoE Micro USB 12V DC Diagram 1 LED Reset