Politec NAT SENSOR Manuals

PRODUCT NAT NAT SENSOR Product code NAT SENSOR INDOOR AND OUTDOOR CURTAIN SENSOR INSTALLATION AND MOUNTING MANUAL VERSION 2.1 Table of contents 2 NAT SENSOR POLITEC | INSTALLATION MANUAL - VER.2.1 1.Introduction…………………………………………………………………………………………………………………………….……...3 2.Product description……………………………………………………………………………………………...............……………..3 3.General warnings………………………………………………………………………………………………………………...……..…. 4 3.1 Additional warnings for devices powered by mains voltage 3.2 Installation warnings 4.List of main components …………………………………………………………………………………………….........…………..5 5.Preparation for installation .................................................. ...............................................................6 5.1 Preparation of the sensor parts before installation 5.2 It is advisable to carry out 6.Placement and installation ………………………………………………………………………………………………….…..........7 6.1 Placement and installation height 6.2 Anti-crawl 6.3 Pet Immunity 6.4 Type of detection 6.5 Wrong installations 7.Mounting ................................................................................................................................................9 7.1 Direct wall mounting 7.2 Wall mounting with canopy 7.3 Mounting with L-shaped bracket 7.4 Mounting with L-shaped bracket and with canopy 7.5 Mounting with NAT BR bracket (Accessory) 8.Circuit board…………….…………………………………………….………………………………………………………..........……..15 9.Component description…..……………………………………………………………………………………….………………….....16 9.1 Terminal board 9.2 Examples of balancing 9.3 DIP functionality 9.4 LED indicators 9.5 Adjustment trimmer 10.Description of functions ……………………………………………………....…………....…........................................19 11.PIR LIMITER ………………..…………………………………………………………………………………………...……………........19 11.1 Application 11.2 PIR LIMITER mounting 12.Installation examples..……………………………………………………………………………………………....………….………21 13.Technical specifications ………………………………………………………………………………………………………..……….23 14.Product disposal………………………………………………………………………………………….……....................………..24 1.Introduction 3 NAT SENSOR POLITEC | INSTALLATION MANUAL - VER.2.1 Congratulations on having purchased a Politec curtain sensor.This appliance guarantees long- lasting and reliable operation if installed correctly.For correct and effective use, it is necessary to read this instruction manual carefully. The system has been designed to detect intrusions and activate the alarm; it is not a device that prevents intrusion.Politec is not responsible for damage, injury or loss caused by accidents, theft, force majeure (including momentary lightning-induced overcurrent), abuse, improper or incorrect use, faulty installation or inadequate maintenance. 2. Product description This curtain sensor has been designed for the protection of entrances (doors and windows) both for outdoor and indoor use. Thanks to its small size, it is particularly suitable for protecting doors, windows and shop windows and, thanks to the materials used and advanced technology, it can be used in any outdoor installation where it is necessary to protect well-defined areas. In order to ensure correct performance, it must be installed on the upper part of the window, door, or French window to detect the movement of a stranger through the entrance. Before installation, check the following conditions: • the wall must not have depressions or excessive protrusions; • avoid positioning the detector near heat sources or in direct sunlight; • avoid the reflection of electromagnetic energy on large surfaces such as, for example, mirrors, metal walls, etc .; • avoid pointing the detector at fluorescent lamps or placing it in their immediate vicinity. If installed outdoors it must be sheltered (not completely exposed to the elements). Warnings Mounting, installation of the sensor and connection to the mains must be carried out by expert and qualified personnel, in compliance with rules and regulations applicable to electrical systems. 3.General warnings 4 NAT SENSOR POLITEC | INSTALLATION MANUAL - VER.2.1 This installation manual contains important information regarding safety for installation: it is necessary to read all the instructions before proceeding with the installation. Keep this manual for future use. • If you have any questions or doubts during installation, do not carry out any operations and contact the support service. • Use of these products for purposes other than those specified in these instructions is prohibited. • You must not make any change to the components of the product unless stated in the manual in order not to void the warranty; such operations can only lead to malfunctions; Politec assumes no liability for malfunctions or damage due to modified products. • Depending on the specific situation of use, check for the need for additional devices: detectors or signalling devices. • During installation, mounting and use of the product, make sure no foreign objects (solids, metals or liquids) are able to penetrate inside the open devices. • Manufacturer's liability:Politec assumes no liability for failures resulting from incorrect installation; lack of maintenance, incorrect assembly or use. • Politec is also not liable for incorrect or incomplete operation of the product or failure to detect intrusion. • Warranty (summary of conditions):Politec guarantees its products for a period of 2 years from the production date.The warranty is applied to those purchasing directly from Politec; there is no warranty for the end user who, in the event of breakdowns or faults, must contact the installer or dealer. • The warranty excludes aesthetic parts as well as parts subject to normal wear and parts subject to normal consumption such as batteries and accumulators. 3.1 Additional warnings for devices powered by mains voltage This manual is intended only for technical personnel qualified to install such devices. • Assessing the hazards that may occur during installation and use of the system, in order to achieve complete safety, it is necessary that installation takes place in full compliance with applicable laws, methods, rules and regulations. • Before accessing the internal terminals of the product, it is necessary to disconnect all the power circuits. • If automatic circuit breakers or fuses trip, before resetting them it is necessary to identify the fault and repair it. 3.2 Installation warnings • Check that all the material to be used is in excellent condition and suitable for use. • Before proceeding with the installation, check the environmental class of the products in the "technical specifications" chapter. • Check, comparing with the values shown in the paragraph "technical specifications", that the range of the devices is correct • Check that the sensor is positioned in areas protected against potential impact, in flat areas and on fixed supports to avoid movements. • Do not place the system components close to heat sources as they could be damaged. • Each sensor has its own operating principle: check the instructions for choosing the right position in the respective instruction manual.

DUAL TECHNOLOGY SENSOR (PIR + Microwave) Outdoor use INSTALLATION MANUAL Politec S.r.l. | Installation manual NAT SENSOR – Ver. 1.10.1 2 INDEX 1 DESCRIPTION Pag. 3 NAT MOTHERBOARD Pag. 4 2 MOUNTING Pag. 5 WALL MOUNTING Pag. 5 WALL MOUNT WITH “L” BRACKET Pag. 6 3 COVER AREA Pag. 7 4 PROGRAMMING AND OPERATION Pag. 8 5 ADDITIONAL FEATURES Pag. 9 OPEN FIELD FUNCTION Pag. 9 EXPOSED AREA FUNCTION Pag. 9 IR ANTI-MASK FUNCTION Pag. 9 MICROWAVE ANTI-MASK FUNCTION Pag. 9 SECURITY FUNCTION Pag. 10 6 DESCRIPTION OF NOT SETTABLE FUNCTION Pag. 10 PET IMMUNITY SYSTEM Pag. 10 SELF-DIAGNOSIS SYSTEM Pag. 10 AUTO-THERMINAL SYSTEM Pag. 10 AUTO-ENVIRONMENTAL SYSTEM Pag. 10 7 APPLICATION Pag. 11 8 PIR LIMITER Pag. 13 MOUNTING Pag. 15 9 TECHNICAL SPECIFICATION Pag. 16 Politec S.r.l. | Installation manual NAT SENSOR – Ver. 1.10.1 3 1. DESCRIPTION  Dual Technology Sensor (PIR + Microwave).  AND operation in the prevention of "false alarms".  IP65 (indoor and outdoor).  Mount directly to the wall or by "L" bracket.  Sensibility adjustable PIR with angular aperture of about 6 °.  Microwave K-band 24 GHz.  IR range adjustable from 0 to 12m.  MW range adjustable from 0 to 12m.  Function and output ANTI-MASKING for infrared and microwave.  RF immunity up to 2Ghz.  Pet Immunity.  Small size (135mm x 33mm x 40mm)  Processing digital signals of PIR and MW.  Temperature Autocompensation.  Environmental Autocompensation.  EXPOSED AREA function.  Operativity Self scanning of PIR technology.  Operativity Self scanning of MW technology.  Tamper output combined anti- removal and anti-tear.  Autolettura e compensazione digitale dell’alimentazione