Prem-I-Air PKY12 Manuals

12000BTU Mobile Air Conditioner Model PKY12 Please read and retain these instructions for future reference SPECIFICATION Model no. PKY12 Cooling capacity 12,000 BTU/hr Power/Ampere consumption for cooling* 1250W / 5.7 A Air volume (max. speed) 350m3/h Humidity removal capacity 36 L/day Power supply 220~240V/50Hz/1phase Compressor Rotary Refrigerant R407C Refrigerant load* 500g Fan speed 3 + Auto Timer 24 hours Working temperature Cooling: 16 ~32oC Exhaust pipe 130 x1800mm Net Weight 31kgs Gross Weight 35kgs Product Dimension (WxDxH) 370 x 400 x 760 mm Please note: The data marked with '*' may vary for technical reasons: for greater precision, please refer to the rating label placed at the back of the unit. Measuring condition for above is: Cooling – DB 27oC , WB 19oC INTRODUCTION This Portable Air Conditioner is designed for improving living and working comfort by adjusting the temperature and humidity in a room. Its mobility makes it easy to use in various rooms. To ensure the optimal efficiency of the air conditioner, we advise you to keep doors and windows closed, and to take into account the surface of the walls and windows exposed to the sun. In this case, in order to optimize the functioning of your air conditioner, we recommend partially closing window coverings. RECOMMENDED USE This unit is designed to be used in the room only, not for outdoor. Do not locate the unit where furniture or other objects can obstruct the cooling airflow. Always keep the filter clean. Prevent any kink or blend in the middle of exhaust hose. The following advice and instructions should be followed closely: 1. Your unit must always be used in an upright position because it contains a cooling agent. 2. After unpacking, place the unit upright to allow the cooling agent to stabilise, and wait 3 hours before use. IMPORTANT SAFETY INSTRUCTIONS 1. Transport & store the unit in an upright position only. Leave it in an upright position for at least 3 hours before first use. 2. Always place the unit on an even, level surface. 3. An opening in a window or wall is required to accommodate the exhaust hose to expel the hot air. 4. Ensure the unit is connected to an earthed power supply of the correct rating. (Refer to the rating label located at the back of the unit). 5. The unit will cool when the room temperature is between 16°C~32°C depending on the thermostat setting. 6. DO NOT use this unit for functions other than those described in this instruction manual. 7. DO NOT tilt the unit. 8. DO NOT cover or obstruct the appliance’s inlet and outlet grilles. 6. Your air conditioner has been designed to be used only in the home, office and similar conditions and should not be used for any other purpose. 7. This unit is for indoor use only. 8. Never unplug the air conditioner while it is working, this could damage the electronic circuits. 9. DO NOT use the appliance in a wet room, such as a bathroom or laundry room to avoid the risk of electrical shocks. 10. DO NOT bend or crush the warm air exhaust hose. 11. DO NOT sit or place articles on the appliance. 12. DO NOT use the appliance with wet or damp hands. 13. DO NOT let chemical substances come into contact with the appliance. 14. DO NOT use the appliance in the presence of flammable substances or such as alcohol, insecticides, petrol, etc. 15. DO NOT use the plug to start and stop the appliance. ALWAYS use the intended control panel to start and stop the unit. 16. ALWAYS turn off the appliance when it is not in use and remove the mains plug from the socket outlet. 17. ALWAYS turn the unit off and remove the mains plug before cleaning, carrying out maintenance or moving location. 18. Avoid the use of adapter plugs, multiple sockets and /or extension leads. If their use is necessary, ensure they conform to current safety standards. 19. Do not pull the electrical cable or place it near a source of heat: always unroll it completely to avoid dangerous overheating. If the power cord becomes damaged, the service agent or a similarly qualified person must replace it, in order to avoid a hazard. 20. The filter must be used with the product at all times, when removing it for clearing always turn the unit off and unplug the mains plug from the socket. 21. Do not operate the unit with a damaged power cord or plug, after it malfunctions, has been dropped or damaged. If the power cord is damaged it must be replaced by the manufacturer or a qualified service engineer to avoid a hazard. 22. Closely supervise any children and pets when unit is in use 23. Only use in the upright position on a flat level surface, at least 50cm from any objects.