PSB CW50R Manuals

Be Heard, Not Seen P S B C u s t o m S o u n d I n - W a l l S p e a k e r S y s t e m The CW50R is a 2-way coaxial in-wall system. The CW50R has been carefully optimized for a neutral and well balanced sound quality. The 5.25-inch woofer with a fi berglass textured polypropylene cone has high power handling, smooth response and extended bandwidth. The 3/4” tweeter has a 2 piece diaphragm and suspension for low resonance and low distortion. The tweeter has a pivoting mount to allow it to be aimed towards the listener’s location for most extended response. “Dog leg” style mounting clips ensure quick and easy mounting. In-wall loudspeakers must deal with limited space within the confi nes behind the wall. Wall cavities are not built to any standard volume so open back in-wall speakers must work within a wide range of wall cavity volumes. PSB accomplishes this by giving the woofers higher mass and stiffness than with conventional “in room” enclosures. Extensive simulations and testing have shown that our designs deliver high-performance sound quality with a broad range of wall cavity volumes. The CW50R can be used with the CWS8 subwoofer/ CWA-1 subamplifi er combination. Full 2nd order high-pass and low-pass crossover fi ltering is used to enhance system power handling and give enough control in the design process to achieve a smooth and very well balanced sound. It is a perfect match to any other PSB product. CW50R - 5.25” Coaxial Speaker System • 5-1/4” woofer with stiff fi berglass textured polypropylene cone, higher cone mass and enhanced motor strength to optimize it to a restricted enclosure volume • Low resonance 3/4 inch pivoting tweeter • High power drivers and crossover for long term reliability • Performance Enclosure and new construction bracket available Frequency Range (-6dB): 65-20,000Hz Recommended Power: 20-60 Watts Impedance (Nominal): 8 Ohms Sensitivity (2.83V @1m) 86dB SPL Drivers: 5-1/4” Woofer 3/4” Dome Tweeter Overall Dimensions (Diameter x D): 7-13/16 diameter x 2-15/16” Cut-out Dimensions (Diameter): 6-1/2” CW50R - 5.25” Coaxial Speaker System www.psbspeakers.com 1 8 8 8 7 7 2 0 0 0 0 • Optimal spacing between speakers should approximately equal the distance from the listening area to the wall. • Make a small exploratory hole and check for obstructions in wall cavity before cutting mounting hole. • Use the mounting template provided to cut the right sized mounting hole. • Lightly fi ll wall cavity with fi berglass 2 feet on either side of the system. Use standard 4” fi berglass split to half thickness. Use 1” thick fi berglass behind system. stem. • Adjust electric screwdrivers to appropriate torque. Tighten mounting screws fi rmly but do not over tighten! • Angle the tweeter inward towards the listening area. • See manual for more installation hints. Installation Notes PSB Speakers reserves the right to change specifications or features without notice. © 2006 PSB Speakers, a division of Lenbrook Industries Limited. PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 08/06. All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers 823 CW50R data. To Reach US Customer Service dial 1 888 772 0000 ext 4445 or 4342 6-1/2" 165mm 2-15/16" 75mm 7-13/16" 198mm