Pullman Holt GB-2000DC Manuals

Save For Future Reference WARNING RISK OF EXPLOSION. Floor sanding can result in an explo- sive mixture of fine dust and air. Use floor-sanding machine only in a well ventilated area free from any flame or match. RISK OF FIRE. Do not use with a flammable or combustible liquid to clean a floor. “Gloss Boss” Burnisher GB-2000DC Operation & Care Instructions IMPORTANT SAFEGUARDS GROUNDING: This burnisher must be grounded while in use to protect the opera- tor from electric shock. The burnisher is equipped with an approved three-conductor cord and three-prong grounding type plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal. If your unit is for use on less than 150 volts, it has a plug like that shown in Figure A. If it is for use on 150 to 250 volts, it has a plug like that shown in Figure D. An adapter (Figures B&C) is available for connecting Figure A plugs to two-prong receptacles. The green-colored rigid ear, lug etc., must be connected to a permanent ground such as a properly grounded outlet box. No adapter is available for a plug as shown in Figure D. Adapter shown in Figure B & C is not for use in Canada. MOTOR: This burnisher is powered by a 1-1/2 HP DC motor and will operate on a 115 VAC 60HZ only. Be sure your power supply agrees with the voltage marked on the name plates. A voltage decrease of more than 10% will cause the motor to slow down, thus increasing the current draw and opening the circuit breaker. EXTENSION CORDS: Burnishers that have 3 wire cords requiring grounding must only be used with extension cords that have 3-prong grounding type plugs and 3-pole receptacles. To determine the minimum wire size required, refer to the chart below: Minimum Wire Size (AWG) of Extension Cord Nameplate Total Extension Cord Length (Feet) Rating-Amps 25 50 75 100 125 150 175 200 0-10.0 18 18 16 16 14 14 12 12 10.1-13.0 16 16 14 14 14 12 12 12 13.1-15.0 12 12 12 12 12 12 12 – Before using an extension cord, inspect it for loose or exposed wires, damaged insulation and defective fitting. CAUTION Always disconnect power cable from outlet when working on this burnisher. This burnisher is a high quality, precision made product. All parts used in the manufacturing of this burnisher have passed rigid quality control standards prior to assembly, and an “each unit” final inspection prior to packaging is your assurance of proper assembly. This burnisher is protectively packed to prevent possible damage in transit. Should damage occur, please notify the transporting carrier immediately for loss and/or claim.