PushCorp AFD1100 Manuals

Wet-Sander AFD1100 Manual PAR01330-2 January, 2000 
     Dallas, Texas CAUTION DO NOT spin the Servo Sanding Motor without supplying water CAUTION Active Force Devices contain calibrated electronics. HANDLE WITH CARE DO NOT DROP DO NOT USE LUBRICATED AIR. This device requires a dry, non-lubricated 80 to 90 psi (5.5 – 6.2 bar) air supply filtered to 5 µm and a 0.3 micron oil mist separator. Non-compliance with these requirements will void the manufacturer’s warranty. (See Section 4.3) All fasteners, mounting holes and pipe threads on this tool are METRIC. All PushCorp, Inc. electrical cables are rated for high twist and flex robotic applications with a minimum cable bending radius specification of 125mm (5 in). Cable damage resulting from failure to abide by this specification will not be covered under warranty. 



                  AWS1100 Wet Sander Manual Table of Contents 1.0 LIMITED WARRANTY .........................................................................................1 2.0 GENERAL OVERVIEW........................................................................................3 3.0 INSTALLATION ...................................................................................................4 3.1 Mounting the AWS1100 ....................................................................................................................4 3.2 Air Supply..........................................................................................................................................5 3.3 Water Connections ...........................................................................................................................7 3.4 Electrical Connections.......................................................................................................................8 4.0 Wetsanding Pad Removal and Replacement ...................................................................................8 4.0 TECHNICAL SPECIFICATIONS..........................................................................9 



                  AWS1100 Wet Sander Manual 1 Copyright
PushCorp, Inc. 2000. All rights reserved. 1.0 Limited Warranty Duration: One year from date of delivery to the original purchaser. Who gives this warranty (warrantor): PushCorp, Inc. Telephone: (972) 840-0208 Corporate Address: P. O. Box 181915 Dallas, Texas 75218 Shipping Address: 3001 W. Kingsley Rd. Garland, Texas 75041 Who receives this warranty (purchaser): The original purchaser (other than for purposes of resale) of the PushCorp, Inc. product What products are covered by this warranty: Any PushCorp, Inc. industrial equipment or accessory supplied or manufactured by the Warrantor. What is covered under this warranty: Defects in material and/or workmanship, which occur within the duration of the warranty period. What is NOT covered in this warranty: A. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE or EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, MALFUNCTION OF THE PUSHCORP, INC. PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. C. Any failure that results from an accident, purchaser's abuse, neglect, unauthorized repair or failure to operate the products in accordance with the instructions provided in the owner's manual(s) supplied with the product. Responsibilities of the Warrantor under this warranty: Repair or replace, at Warrantor's option, products or components which have failed within the duration of the warranty period.