Quoizel SNN9009K Manuals

1of2 6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com , . . . Thank you for purchasing a Quoizel product. Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com 2015 QuoizelInc. Please go to for product cleaning tips. Go to the selection. (1) Medium Base bulb 100W Maximum,Alternate bulb (1) 23W CFL. www.quoizel.com Care + Maintenance Light Source: Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. EstimatedAssembly Time: Preparation: 20-30 minutes Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts. Warnings and Cautions Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt. These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation. Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result. Package Contents Fixture Body x 1 B STEP 1 Install Bulb - A. Remove the Fixture Hood from the Cage by unscrewing Screws on the Fixture Hood. B. This fixture uses standard bulb with a medium screw base. Maximum 100 watts. Insert bulb and screw snugly into place. C. Attach the Fixture Hood back onto the top edge of the Cage and secure with the previously removed Screws. Hand tighten until snug. Screw Cage Fixture Hood Figure 1 STEP 2 Drill Pilot Holes on Post - A. Carefully fit the Post Fitter over the end of the Post (not supplied), making sure the Post Fitter is fully seated. B. Mark the drill point for the (3) Mounting Screws, using (3) Mounting Holes as reference. After marking hole locations, remove fixture from post and drill 1/16” pilot holes for screws. Post Post Fitter Figure 2 Mounting Hole STEP 3 - Wire Connections A. Use standard wire connectors (not included) to make all wire connections. (Connectors are not included with fixture.) Twist White wire from supply White wire from fixture Black wire from supply (or Red) Black wire from fixture Ground wire from supply Ground wire from fixture Figure 3 A Mounting Screw x 3 June2015 Assembly Instruction Sheet #IS-SNN9009 For Styles SNN9009K, SNN9009PN and SNN9009W Bulb Socket STEP 4 - Attach Fixture Body to Post A. Coat the top 1” of the Post with Clear Silicone Caulk (not supplied) and position the Post Fitter onto the Post. Be sure to seat it completely, aligning the holes in the Fitter with the 1/16” Pilot Holes drilled into the Post. B. Secure the Fixture to Post with (3) Mounting Screws (A). Your fixture is now assembled and ready to use. Enjoy! Post Post Fitter Figure 4 Mounting Hole (Step 3 Continued) connectors until wires are tightly joined together. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Outlet Box. HOW TO REPLACE GLASS PANELS Screw Lock Screw Fixture Hood Glass Holder Glass Panel Cage A. Fixture Hood and remove Fixture Hood from the Cage. B. Remove Bulb from inside of the Cage. C. Remove Lock Screws from the Cage and remove Glass Holders. Replace Glass Panels from the Cage and then re-install Glass Holders to secure them. Secure with removed Lock Screws. D. Re-install the Bulb and re-attach the Fixture Hood to the Cage. Secure with Screws and hand tighten until snug. Unlock Screws on the Figure 5 Bulb 2of2 Thank you for purchasing a Quoizel product. Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com 2015 QuoizelInc. June2015 (1) 100W Bulb (Not Supplied) Medium Base PART NUMBER 1 NO. PART NUMBER REPLACEMENT PART REQ. G3729PA 4 GLASS PANEL NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4" SNN9009K FINISH: MYSTIC BLACK SNN9009PN FINISH: PALLADIAN BRONZE SNN9009W FINISH: FRESCO 16” 9.5” SQ. 1