Quoizel VVTH9348BN Manuals

Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Warnings and Cautions 1of2 Assembly Instruction Sheet #IS-VVTH9348 For Styles VVTH9348BN,VVTH9348AB, IB VVTH9348 6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com , . . . Thank you for purchasing a Quoizel product. Need assistance withparts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com 2014 QuoizelInc. March2014 Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt. These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation. Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result. Package Contents C A D B E C F Socket Assembly x 1 STEP 1 Install Rods and Socket Assembly - A. Thread the Socket Assembly (C) and the Rods (D/E) to the Base (F) together as shown. Hand tighten until snug. Note: If the shade and the base are not lined up after assembly, unscrew the hex nut on the bottom of the base with the wrench (B), adjust the rods until the shade and the base are lined up. And then secure the rods to Figure 1 Threaded Rod x 1 Rod x 1 Base x 1 Tools Required: Flathead screwdriver, Phillips screwdriver. Bulb Recommended: EstimatedAssembly Time: Preparation: LED 7W 15-20 minutes Identify and inspectall parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contactcustomer service for replacement parts. A Plug x 1 B Wrench x 1 D E F Adjustment Button the base. Hand tighten until snug with the Wrench (B). B. Adjust the Support Arm and the Shade to proper location by adjust the Ajustment Buttons. C. Insert the Plug (A) into the cord from the Base (F) as shown. Your fixture is now assembled and ready to use. Enjoy! Replace LED Lamp A. Unscrew the lock screws from the shade and remove the diffuser from the shade. B. Unscrew the screws on the LED Lamps and remove the LED lamp. Pull out the connectors from the fixture and seperate the connectors on the wires. C. Connect the female connector of the replacement LED lamp to the male connector from fixture. Attach the LED lamp into the shade holder and secure with the removed lock screws. D. Place the diffuser back onto the shade and secure with the removed screws. Hand tighten until snug. 2of2 Thank you for purchasing a Quoizel product. Need assistance withparts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com 2014 QuoizelInc. March2014 VVTH9348BN/VVTH9348AB/VVTH9348IB PART NUMBER NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION REQ. NO. 1 FINISH:BRUSHED NICKEL/ AGED BRASS/IMPERIAL BRONZE 21” 49” 11” Dia.