Radio Shack 43-1107 Manuals

OWNER’S MANUAL — Please read before using this equipment. © 2000 Tandy Corporation. All Rights Reserved. RadioShack and RadioShack.com are trademarks used by Tandy Corporation. 900 MHz Cordless Telephone with Headset Jack Your RadioShack 900 MHz Cordless Tele- phone uses the 900 MHz band for less inter- ference, clearer sound, and greater range than 46/49 MHz cordless telephones. Its headset jack means you can connect an op- tional headset for hands-free convenience. The phone’s other features include: 40 Channels — automatically selects a clear channel when you make or answer a call. You can also manually change channels during a call. 10-Number Memory Dialing — lets you store up to 10 numbers (3 one-touch and 7 speed-dial) in memory for easy dialing. Page — lets you send a paging signal from the base to the handset to page someone or locate the handset if you misplace it. Handset Volume Control — lets you adjust the volume you hear through the handset. Programmable Ringer — lets you select from four ringer tone/volume settings. Long Battery Life — provides up to 7 hours continuous talk time, with 7 days standby bat- tery life. Super CCT Noise-Reduction Circuitry — provides clear telephone conversations, giv- ing you sound clarity comparable to that of a corded phone. Security Access-Protection Code — automatically prevents other cordless phone users from using your phone line. Quick Talk — lets you make or answer a call by just lifting the handset from the base. This telephone has been tested and found to comply with all applicable UL and FCC stan- dards. Important: Cordless phones such as this one require AC power to operate. When the AC power is off, you cannot dial out or receive in- coming calls using your phone. You should also have a phone that does not need AC power to operate (not a cordless phone) so you can still make and receive calls if there is an AC power failure. WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. This symbol is intended to alert you to the presence of uninsu- lated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to con- stitute a risk of electric shock. Do not open the product’s case. This symbol is intended to inform you that important operating and maintenance instructions are included in the literature accom- panying this product. ! !