Radio Shack 43-3107 Manuals

ENGLISH ENGLISH QUICK START QUICK START QUICK START QUICK START 43-3107 Indoor/Outdoor Modular Intercom System Refer to your Owner’s Manual for complete instructions. www.radioshack.com™ © 2002 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. 1. Remove the doorbell’s battery compartment cover. 7. Mount the doorbell using the supplied bracket, anchors, and screws as shown. 2. Insert 4 AA batteries. 8. If desired, mount the indoor intercom using the supplied anchors and screws as shown. 5. Slide VOL 1 2 3 to the desired volume and replace the cover. 3. To change the doorbell tone, use a flat blade screwdriver to remove TONE, and insert it into the other two pins. 4. Slide CH 1 2 3 to the same channel as the indoor intercom. PREPARATION 6. Plug the indoor intercom into a standard AC outlet. OPERATION 1. Rotate VOLUME on the indoor intercom counterclockwise until it clicks. Then adjust VOLUME to the desired listening level. 2. To turn off the indoor intercom, rotate VOLUME clockwise until it clicks. 3. Press BELL on the doorbell to sound the indoor intercom. Hold down TALK TO DOOR on the indoor intercom to reply. When you release TALK TO DOOR, the caller can reply by holding down PRESS TO TALK on the doorbell intercom. Doorbell Intercom BELL — Press to sound the indoor intercom. PRESS TO TALK — Hold down to talk to the other person. Indoor Intercom CALL — Press to sound an alert tone to the other station. TALK — Hold down to talk over the intercom. TALK TO DOOR — Hold down to talk to the other person. VOLUME — Adjusts volume and powers it on and off. A B C CHANNEL — Set multiple intercoms to the same channel to communicate with them. 1 2 3 OUTDOOR CHANNEL — Set to the same channel as the doorbell intercom.