Radio Shack 63-1037 Manuals

© 2002 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. OWNER’S MANUAL — Please read before using this equipment. www.radioshack.com™ 63-1037 Thank you for purchasing the RadioShack Wireless Pool/Spa Thermometer. Your thermometer measures water temperature, and is useful in swimming pools, hot tubs, and freezers. It is for use with an in/out thermometer (not supplied, available at your local RadioShack store or online at www.radioshack.com). The supplied wall mount holder and stand let you mount it wherever you like. +056#..+0)" $#66'4+'5 Your thermometer requires two AA batteries (not supplied) for power. For the best performance and longest life, we recommend RadioShack alkaline batteries.RRRRý. . . . 1. Remove the wall-mount holder from the back of the thermometer. 2. Use a Phillips screwdriver to loosen the screws on the battery compartment cover and remove the cover. 3. Slide CHANNEL 1/2/3 to the desired setting, then press RESET. The selected channel appears on the display. 4. Slide °°°°C/°°°°F to the desired setting. 5. Place two batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside. 6. Replace the cover and secure it with the screws. RRRRý 12'4#6+10 Place the temperature sensor probe where you want to test. The current temperature and selected channel appear. Signals transmit to the main unit about every 30 seconds. ± ± ± ± 4'5'66+0)"6*'"5;56'/ If your thermometer stops working properly, use a pointed object to press RESET. This resets the temperature and reinitializes the sensor transmitter. /1706+0) Place your thermometer on a flat surface using the supplied stand, or mount it on the wall using screws (not supplied) and the supplied holder. 5'.'%6+0)"#".1%#6+10 Choose an indoor or outdoor location for your thermometer that is within 60 – 90 feet (20 – 30 meters) of the main unit. ± ± ± ± P O O L S P A WIRELESS THERMOMETER Liquid Crystal Display — The current temperature and selected channel appear. Temperature Sensor Probe — Place it in water to test the temperature. °C / °F — Select Centigrade (°C) or Fahrenheit (°F) for your desired degree format. Wall Mount Holder — Use to mount the thermometer on a wall. Removeable Stand — Use to set thermometer on a table or other flat surface. Channel 1/2/3 — Slide to Channel 1, 2, or 3. Set to a different channel than the other remote sensors you are using. y y y y — Appears if the batteries are weak. ."%#76+10". • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. • If you do not plan to use the thermometer for a month or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. °C/°F CHANNEL 1/2/3 RESET Battery Compartment Cover R"9#40+0)"R Dispose of old batteries promptly and properly. Do not burn or bury them. ±"016'"±" Operation • Do not set two or more thermometers to the same channel when using them with one main unit. Otherwise you will unable to judge which thermometer the digits represent. • Your thermometer comes with a protective film covering the display which should be removed before use. Selecting a Location The construction of your home or office might affect the transmission range between the main unit and the thermometer. If you have a choice of several locations, try each to see which provides the best performance. 9KTGNGUU"2QQN15RC"6JGTOQOGVGT #"+/2146#06"# If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information. RRRRý— Warning # — Important ± ± ± ± — Note . . . . — Caution ° ° ° ° — Hint