Rail King E-3 AA Diesel Manuals

E-3 AA Diesel Locomotive Set OPERATOR’S MANUAL PLEASE READ BEFORE USE AND SAVE Compatibility This engine will operate on any traditional O-31 Gauge track system, including M.T.H.’s RealTrax ® or ScaleTrax ™ or traditional tubular track. It is also compatible with most standard AC transformers. (See page 15 for a complete list of compatible transformers and wiring instructions.) CAUTION: ELECTRICALLY OPERATED PRODUCT: Not recommended for children under 10 years of age. M.T.H. recommends adult supervision with children ages 10 - 16. As with all electric products, precautions should be observed during handling and use to reduce the risk of electric shock. WARNING: When using electrical products, basic safety precautions should be observed, including the following: Read this manual thoroughly before using this device. M.T.H. recommends that all users and persons supervising use examine the hobby transformer and other electronic equipment periodically for conditions that may result in the risk of fire, electric shock, or injury to persons, such as damage to the primary cord, plug blades, housing, output jacks or other parts. In the event such conditions exist, the train set should not be used until properly repaired. Do not operate your layout unattended. Obstructed accessories or stalled trains may overheat, resulting in damage to your layout. This train set is intended for indoor use. Do not use if water is present. Serious injury or fatality may result. G G G G Do not operate the hobby transformer with damaged cord, plug, switches, buttons or case. Table of Contents Set Up Checklist................................................................................................... 3 Lubrication.............................................................................................3 Basic Operation.................................................................................................... 4 Activating Features.................................................................................4 Loco-Sound Operating Instructions...................................................................6 Activating Loco-Sound Features........................................................... 6 Speed Control........................................................................................ 7 Locking Locomotive Into A Direction.................................................. 7 Using Proto-Cast and Proto-Dispatch Features..................................... 8 Maintenance .........................................................................................................9 Lubricating and Greasing Instructions...................................................9 Cleaning The Wheels, Tires and Track..................................................10 Traction Tire Replacement Instructions.................................................11 Headlight Replacement Instructions......................................................12 Troubleshooting Loco-Sound Problems................................................ 13 Transformer Compatibility and Wiring Chart....................................... 15 Service & Warranty Information........................................................... 16 Limited One-Year Warranty..................................................................16 RailKing E-3 AA Diesel Set 3 Set Up Checklist • Lubricate the locomotive • Apply power to run as described in the Basic Operating Section of this manual Lubrication You should lubricate the engine to prevent it from squeaking. Use light household oil and follow the lubrication points marked “L” in Fig. 1. Do not over-oil. Use only a drop or two on each pivot point. Lubricate Pick Up Rollers (L) Lubricate Wheel Axles (L) Figure 1. Lubrication Points on the Locomotive DO NOT OVER OIL 4 RailKing E-3 AA Diesel Set Basic Operation The Throttle knob controls how fast your train will travel. Turn the throttle knob up ½-way, until the engine and caboose lights shine bright. Put the engine into motion by pressing the Direction button on your transformer once. (hold it for approximately 1 second) If the engine does not begin to move as soon as you firmly press the Direction button, you may not have sent enough voltage to the track to make the train move. Turn the throttle up a bit higher until the train begins to move. Throttle To increase or decrease track voltage, and therefore train speed, turn the throttle control knob. Turning clockwise will increase voltage and speed, while turning counterclockwise will decrease voltage and speed. The engine will maintain the speed you set after you release the throttle until you turn it again to change the voltage and speed. Bell - To sound the bell, in an engine equipped with a bell firmly press and release the Bell button. To turn the bell off, press and release the Bell button again. The bell will continue to ring from the time you turn it on until you press and release the button again to turn it off. Horn/Whistle - To sound the whistle, firmly press the Horn/Whistle button. The whistle will sound for as long as you continue to depress the button. It will stop when you release the button. Direction Your train is programmed to start in neutral. The train will always cycle neutral-forward-neutral-reverse with each press and release of the direction button. The engine is programmed to restart in neutral each time the track voltage is turned off for 25 seconds or more. Cycle Phases Neutral Neutral Forward Reverse Activating Features