rako WCM-070 Manuals

2 pdf manual(s) rako WCM-070 for free download (Document Types: Instruction manual)

rako WCM-070 Instruction manual [PDF] (4 pages)

  • Identifier: id-1356264
  • Brand: rako
  • Device: WCM-070 Keypad
  • Type: PDF
  • Key Aspects: End-of-Life Handling and Disposal, Critical Operational Precautions, Performance Optimization Tips
  • UPD Date: 30.04.2026
  • Source File: 1371491.pdf
  • Pages: 4
  • Description: Comprehensive instruction manual for the rako WCM-070.
Pages Preview:
  • Installation of the WCM with screwless finish plates (WLF/WLM): Step 1 Prepare cable(s) in backbox ready for connection. Separate the two halves of the WCM ready for installation. The “back” section (with the punchdown connections) will be installed first. TIP​: Leave plenty of slack if possible to allow for re-punching down at a later date if required. Step 2 Punch down cable(s) matching cable colours to colours written on the circuit board. There m
  • Installation of the WCM with screwed finish plates (WVF): Step 1 Prepare cable(s) in backbox ready for connection. Seperate the two halves of the WCM ready for installation. The “back” section (with the punchdown connections) will be installed first. TIP​: Leave plenty of slack if possible to allow for re-punching down at a later date if required. Step 2 Punch down cable(s) matching cable colours to colours written on the circuit board. There may be
  • Terminating the WCM It is important to terminate WCMs correctly otherwise the wired system will not function. The termination that is required depends on the nature of the installation and the position of the RAK-LINK within the system. No Term - Both Jumpers removed Used when the WCM is not at the end of line. This is usually identifiable by two cables being punched down to the WCM. Term - Jumper fitted across 1+2 & 4+5 Used when the WCM is end of line in
Document Preview & Text Transcription (Main Page)
Click to expand and read text
WCM-041 Instruction Manual For programming information:​ ​Wired system Programming Guide For general overview: ​Wired RAK Application Sheet What is the WCM-041? The WCM-041 wired keypad is a four button keypad for use with the wired system. It will transmit Scene 1 and Off in two rooms before any custom programming is added. WCMs require a RAK-LINK to operate as part of the system. WCMs (as part of the wired network generally) can be wired in two ways: “Daisy Chain” configuration - ​A single run of keypads runs from the RAK-LINK and to an end point. It is still usually advisable to run a return leg back to the RAK-LINK as a spare. “STAR” configuration - ​Cables are all run back to a central point: a RAK-STAR usually located with the RAK-LINK. Each cable can be from a single keypad or a leg of keypads. Installation Note: The WCM comes in two sections “Front” and “Back” they are referred to as such in the following installation guide. The “Back” section is just a connection board for the CAT5/6 cable. The “Front” section contains all memory and programming. WCM-041 Manual Version 2.0.2

rako WCM-070 Instruction manual [PDF] (4 pages)

  • Identifier: id-2121700
  • Brand: rako
  • Device: WCM-070 Keypad
  • Type: PDF
  • Key Aspects: Efficiency and Calibration Tips, Risk Mitigation and Accident Prevention, Device Specifications Overview
  • UPD Date: 14.08.2026
  • Source File: 2165937.pdf
  • Pages: 4
  • Description: Full user manual for the rako WCM-070.
Pages Preview:
  • Installation of the WCM with screwless finish plates (WLF/WLM): Step 1 Prepare cable(s) in backbox ready for connection. Separate the two halves of the WCM ready for installation. The “back” section (with the punchdown connections) will be installed first. TIP​: Leave plenty of slack if possible to allow for re-punching down at a later date if required. Step 2 Punch down cable(s) matching cable colours to colours written on the circuit board. There m
  • Installation of the WCM with screwed finish plates (WVF): Step 1 Prepare cable(s) in backbox ready for connection. Seperate the two halves of the WCM ready for installation. The “back” section (with the punchdown connections) will be installed first. TIP​: Leave plenty of slack if possible to allow for re-punching down at a later date if required. Step 2 Punch down cable(s) matching cable colours to colours written on the circuit board. There may be
  • Terminating the WCM It is important to terminate WCMs correctly otherwise the wired system will not function. The termination that is required depends on the nature of the installation and the position of the RAK-LINK within the system. No Term - Both Jumpers removed Used when the WCM is not at the end of line. This is usually identifiable by two cables being punched down to the WCM. Term - Jumper fitted across 1+2 & 4+5 Used when the WCM is end of line in
Document Preview & Text Transcription (Main Page)
Click to expand and read text
WCM-070 Instruction Manual For programming information:​ ​Wired system Programming Guide For general overview: ​Wired RAK Application Sheet What is the WCM-070? The WCM-070 wired keypad is a seven button keypad for use with the wired system. It will transmit Scene 1-7, Off, Fade Up/Fade Down in a single room before any custom programming is added. WCMs require a RAK-LINK to operate as part of the system. WCMs (as part of the wired network generally) can be wired in two ways: “Daisy Chain” configuration - ​A single run of keypads runs from the RAK-LINK and to an end point. It is still usually advisable to run a return leg back to the RAK-LINK as a spare. “STAR” configuration - ​Cables are all run back to a central point: a RAK-STAR usually located with the RAK-LINK. Each cable can be from a single keypad or a leg of keypads. Installation Note: The WCM comes in two sections “Front” and “Back” they are referred to as such in the following installation guide. The “Back” section is just a connection board for the CAT5/6 cable. The “Front” section contains all memory and programming. WCM-070 Manual Version 2.0.2

WCM-070: Related Instructions

RCI-7M
rako RCI-7M
18.05.2026 2 pages

RCI-7M Instruction Manual The Rako RCI-7M is a battery powered interface unit for up to 7 momentary volt- free switch inputs. Programmed by NFC (Near Field Com Owner’s guide for the rako RCI-7M Recording Equipment. The document highlights operating procedures and troubleshooting, startup procedures, technical assistance, network setup.

RAK-LINK
rako RAK-LINK
06.05.2026 4 pages

RAK-LINK Instruction Manual What is the RAK-LINK? The RAK-LINK is a required element of any wired system. The RAK-LINK powers the wired network and also provide Instruction guidebook for the rako RAK-LINK Cables and connectors. This documentation details menu navigation, startup procedures, support details.

RAK8-MB
rako RAK8-MB
15.06.2026 6 pages

RAK8-MB Instruction Manual For programming information:​ ​“Wireless RAK/Wired programming guide” For general system information: ​“​Wireless RAK/W Operating handbook for the rako RAK8-MB Motherboard. It includes troubleshooting procedures and product specifications, component replacement, technical overview, technical guidelines.

RCM100
rako RCM100
23.08.2026 2 pages

General RCM100 Wall-plate electronics module is a wireless 10 button wall mounted control panel providing 7 Scenes plus Off and Master Raise and Lower. The unit Official installation manual for the rako RCM100 Control Panel. This guide explains technical procedures for device safety checks, component replacement, usage tips, usage recommendations.

WSR-DMX
rako WSR-DMX
11.08.2026 2 pages

WSR-DMX INSTALLATION INSTRUCTIONS General The Rako WSR-DMX module is designed to link between a Rako Wired system and a standard DMX Lighting controller. Comman Step-by-step user manual for the rako WSR-DMX Control Unit. It describes step-by-step basic operation, service contacts, operation, safety features.

RAK8
rako RAK8
08.09.2026 3 pages

RAK8 Motherboard Instruction Manual For programming information see “RAK8 wired/wireless programming guide” Overview: The RAK8 Motherboard forms the base fo Installation instructions for the rako RAK8 Motherboard. The documentation includes details on maintenance, hardware setup, cleaning instructions, operational guidelines.

Similar Manuals in the Keypad Category

AL-1103
GE AL-1103
11.04.2026 76 pages

Alliance System User Manual Official user handbook for the GE AL-1103 Keypad. It describes usage and device reset instructions, performance optimization, technical overview, setup instructions.

SV-8100
NEC SV-8100
24.03.2026 2 pages

Call Indicator Lamps Lamp at top corner of handset flashes when a call terminates to the terminal. Lamp lights steadily when a message has been left. Programmab Official operating instructions for the NEC SV-8100 IP Phone. The guide focuses on installation support, device instructions, error handling, service procedures.

DigiPREP Series
SCP SCIENCE DigiPREP Series
25.03.2026 49 pages

KeyPad service manual Rev.1.1 1 Copyright 2003 by SCP SCIENCE All Rights Reserved This manual contains proprietary information, which shall not be reproduced or User guide for the SCP SCIENCE DigiPREP Series Keypad. The document highlights operating procedures and replacement parts, usage procedures, product handling, operating guidelines.

49-454
Radio Shack 49-454
02.07.2026 28 pages

Owner’s Manual Please read before using this equipment. Extra Keypad for Alarm System Product instruction handbook for the Radio Shack 49-454 Keypad. This documentation guides on firmware installation, assembly reference, user instructions, user preferences.