Raymarine E140 Manuals

E-Series Widescreen Multifunction Display Quick reference guide E90W, E120W and E140W models E-Series Widescreen Quick reference Safety notices Warning: Ensure safe navigation This product is intended only as an aid to navigation and must never be used in preference to sound navigational judgment. Only official government charts and notices to mariners contain all the current information needed for safe navigation, and the captain is responsible for their prudent use. It is the user’s responsibility to use official government charts, notices to mariners, caution and proper navigational skill when operating this or any other Raymarine product. Powering the display on 1. Press and hold the POWER button until the Raymarine logo appears. 2. Press OK to acknowledge the warning window. Powering the display off 1. Press and hold the POWER button until the countdown reaches zero. Note: If the POWER button is released before the countdown reaches zero, the power off is cancelled. Adjusting the display brightness 1. Press the POWER button once. The Backlight Level control is displayed. 2. Using the rotary control, adjust the brightness level as appropriate. 3. To switch the color palette between Day (very bright) and Night (dark) modes, select MENU > Display Setup > Palette. Simulator mode The Simulator mode enables you to practice operating your display without data from a GPS antenna, radar scanner, AIS unit, or fishfinder. The simulator mode is switched on/off in the System Setup Menu. You can also adjust the vessel speed in simulator mode. This is useful for quickly moving to different areas of the chart, for example. Note: Raymarine recommends that you do NOT use the simulator mode whilst navigating. Note: The simulator will NOT display any real data, including any safety messages (such as those received from AIS units). Note: Any system settings made whilst in Simulator mode are not transmitted via SeaTalk to other equipment. Enabling the simulator mode 1. Press Menu. 2. Select the System Setup menu. 3. Select the Simulator item, and change its value to On. 3