Red Ion RBDLA Manuals
1 pdf manual(s) Red Ion RBDLA for free download (Document Types: Manual )
Red Ion RBDLA Manual [PDF] (2 pages)
- Identifier: id-1399342
- Brand: Red Ion
- Device: RBDLA Controller
- Type: PDF
- Key Aspects: Cleaning and Sanitization Methods, Safety Recommendations and Warnings, Pre-Installation Safety Requirements
- UPD Date: 27.03.2026
- Source File: 1328412.pdf
- Pages: 2
- Description: Product operation manual for the Red Ion RBDLA.
Click to expand and read text
INSTALLING AN OUTPUT BOARD 1. Remove the controller from the case. 2. Lift up on the top bezel board latch while gently pulling out on the bezel/ display board assembly. Do NOT remove the display board from the bezel. 3. Remove the output board by pulling it away from the other boards. Replace the output board by aligning the board to board connector. Be certain the connector is fully mated. 4. Connect the bezel/display board assembly by guiding the board ends into the bezel latches. Slide the assembly on evenly until the display board connector is completely engaged and bezel latches are fully seated onto the boards. Note: When replacing the output board, be certain to install a new output board of the same type. Appropriate rewiring considerations must be given if the output board type is changed. T48/P48/TLA OUTPUT BOARD MD1797 D P %PDV MN A1 A2 EB0783 CONNECTOR BOARD DISPLAY O1 LATCH BEZEL BOARD BOARD ASSEMBLY BEZEL/DISPLAY SECOND INPUT/RS485 BOARD * POWER BOARD SUPPLY CPU BOARD %P * MODEL NUMBER DEPENDENT D P DV MN O1 A1 A2 CONNECTOR OUTPUT BOARD MD1797 EB0783 EB0784 OUTPUT BOARD AL1 O1 AL2/O2 BOARD OUTPUT RELAY OUTPUT BOARD LOGIC/SSR DRIVE AL1 O1 AL2/O2 LIMIT AL1 #RBDLA210 Output Board Form-C Relay Bulletin No. RBD48-D Drawing No. LP0347 Released 06/13 Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion.net Caution: The bezel assembly contains electronic circuits that can be damaged by static electricity. Before removing the assembly, discharge static charge on your body by touching an earth ground point. It is also important that the bezel assembly be handled only by the bezel itself. When handling a circuit board, be certain that hands are free from dirt, oil, etc., to avoid circuit contamination that may lead to a malfunction. SPECIFICATIONS & TYPICAL CONNECTIONS Relay Connections RBD48 Relay Outputs: Type: Form-A (Shared common for the Alarms) Contact Rating: 3 A @ 250 VAC or 30 VDC (resistive load) RBDLA Relay Outputs: Limit Relay Type: Form-C Alarm 1 Relay Type: Form-A Contact Rating: 5 A @ 250 VAC or 30 VDC (resistive load) Life Expectancy: 100,000 cycles at max. load rating. (Decreasing load and/ or increasing cycle time, increases life expectancy.) To prolong contact life and suppress electrical noise interference due to the switching of inductive loads, it is good installation practice to install a snubber across the contactor. Follow the manufacturer’s instructions for installation. Note: Snubber leakage current can cause some electromechanical devices to be held ON. CONTROLLER LOAD FUSE 01 AC/DC POWER N.O. COMM. LOAD LOAD FUSE AC/DC POWER AL2/02 AL1 N.O. COMM. N.O. Main Control Output Alarm Outputs/Cooling
RBDLA: Related Instructions
1 GENERAL DESCRIPTION The G303 Operator Interface Terminal combines unique capabilities normally expected from high-end units with a very affordable price. It i Advanced user guide for the Red Ion G303 Touch terminals. It covers technical specifications, configuration options, security instructions.
3.80 (96.52) (49.53) (2.54) (44.45) 3.60 (91.44) 4.14 (105) 1.95 0.10 1.75 1 3 2 4 PAX2S 1/8 DIN Strain Gage Input Panel Meter Installation Guide DIMENSIONS In Owner’s guide for the Red Ion PAX2S Measuring Instruments. This manual covers installation, operation, and product safety, security instructions, reset instructions.
(134.4) (137.4) .40 (49.5) (10.2) PAR 1.95 PGM %PW DSP AL1 MAN OP1 AL2 (96.5) 3.80 5.29 5.41 (44.4) 1.75 3.60 (91.4) (45 ) +.6 (92 ) 3.62 -.0 +.03 -.0 +. Instruction guide for the Red Ion TSC Temperature Controller. The manual highlights operating modes, device calibration, operating guidelines, wiring setup.
CONNECT. MONITOR. CONTROL. © 2014 Red Lion Controls. All Rights Reserved 1 QUICK START GUIDE IndustrialProTM BT-6800 Series Wire Official user manual for the Red Ion IndustrialPro BT-6800 Series Modem. It details operating modes and warranty information, operational procedures, safety guidelines.
1 PROCESS TIME INDICATION 6-DIGIT, 0.56" (14.2 mm) HIGH RED LED DISPLAYS DISPLAY MODES 999999 OR 999-59 INPUT RATES UP TO 25 KHZ ACCEPT User support manual for the Red Ion PAXLPT Measuring Instruments. The manual highlights software configuration, power management, service contacts.
1 ! COUNT INPUT FROM 10 to 300 VAC/DC ! LCD, POSITIVE IMAGE REFLECTIVE OR NEGATIVE IMAGE TRANSMISSIVE WITH YELLOW/GREEN OR RED LED BACKLIGHTING (9 to 28 VDC pow Operating manual for the Red Ion CUB7W Cash Counter. This guide presents technical assistance, device instructions, maintenance guidelines.
Similar Manuals in the Controller Category
M A N U A L Digital Three-Phase Servo Amplifier BAMOCAR-PG-D3-700/400-400 EC-synchronous-servo motors AC-asynchronous-servo motors Hans-Paul-Kaysser-Straße 1 E Setup instructions for the Unitek BAMOCAR-PG-D3-700/400 Amplifier. This guide includes user instructions, hardware instructions, repair references.
Self-powered Totalizer H7E C-7 Counters Self-powered Totalizer H7E Compact Economical Totalizer with High Visibility Available with Backlit LCD Display • Larg Quick start guide for the Omron H7E Battery Charger. The manual outlines technical specifications and operational guidelines, network configuration, reset instructions.
WLC�T04 SINGLE CHANNEL WIRELESS LENS CONTROL NUCLEUS Use the included M6 screw to attach the plate to the handle of the Gravity G2X and the Ronin-S’s M4 scr Complete service manual for the Tiltamax Nucleus Nano WLC-T04 Controller. This documentation guides on setup, replacement parts, software configuration, connectivity options.
GSC400 Programmer and PC Interface User Manual Full Version File: GSC400 PC Interface Rev1.7.doc, September 2014 GSC400 Series GSC400 Programmer and PC Interf Official user handbook for the DynaGen GSC400 Series Motherboard. This guide describes usage examples, regulatory notices, operational safety, hardware setup.