Reflections Carrera Manuals

LED ILLUMINATED ALUMINIUM CABINETS Installation Instructions Carrera REFLECTIONS DESIGNER LED MIRRORS by LTL ELECTRICAL SAFETY INSTRUCTIONS All connections must be installed by a licensed electrician, in accordance with current building codes. Consult a qualified electrician. IMPORTANT Always switch off the electrical supply at the main during installation and maintenance. It is recommended that the circuit breaker is switched off for the necessary circuit before installation commences. Fitting in Bathrooms is subject to the appropriate building code Regulations. This product is NOT suitable for outside zones. It is also Not suitable for installation in saunas, steam rooms or shower cubicles. This product is only suitable for permanent installation. DO NOT connect to a trailing plug and socket outlet. This product is only suitable for indoor use. Do not attach the product to surfaces that are damp or otherwise electrically conductive. INSTALLATION CARE & SAFETY Wear suitable eye protection when drilling. Take care when using power tools. Beware of hidden cables or pipes. Take care if drilling on tiled surfaces in case the drill slips. A piece of masking tape applied to the wall before marking out the fixing holes will stop the drill from wandering. IMPORTANT The product must be installed with a minimum distance of 6” between the infrared sensor and an adjacent wall or obstruction to ensure correct function of the sensor. (See diagram A) DO NOT strike glass components with hard or pointed items. DO NOT place very hot or very cold items against or in close proximity to glass surfaces unless an adequately thick insulation material is used to prevent such items coming in contact with the glass. The nominal thickness of the mirror glass used in this product is 1/4” and is film backed for safety. If the glass becomes chipped or broken replace immediately. Diagram A CLEANING It is recommended that the unit is cleaned with a soft, dry, non abrasive cloth when turned off. Never use cleaning agents or abrasive materials on any type of surface finish. Do not allow moisture to come into contact with the electrical components. 125 Rt. 61 Schuylkill Haven, PA 17972 1-800-360-1585 • fax 570-385-5475 • [email protected] www.ltlhomeproducts.com