Reichert 16255 Manuals

Reichert® Phoroptor® VRx & SightChek™ Wireless Dongle Kit 16255 For use with AL500 or computer Reichert, Inc. www.reichert.com • 3362 Walden Avenue, Suite 100, Depew, NY 14043 USA Toll Free: 888-849-8955 • Tel: +1 716-686-4500 • Fax: +1 716-686-4545 16255-101 Rev. B (August 20, 2018) ©2018 AMETEK, Inc & Reichert, Inc. Bluetooth trademark is owned by Bluetooth SIG. guid com Wireless Dongle Kit Contains: Welcome to the Reichert® Phoroptor® VRx Wireless Dongle Kit 16255, allowing Bluetooth® wireless connectivity between Phoroptor® VRx and either an AL500 or computer. NOTE: This document will familiarize you with your new Phoroptor VRx accessory. To use this Wireless Dongle you must first configure it to communicate with the Phoroptor VRx. Please refer to the Phoroptor VRx Digital Refraction System User’s Guide (16241-101) for complete installation, configuration, and compliance information. To obtain a copy of 16241-101, please contact Reichert, your Reichert authorized dealer, or you may download it from the Phoroptor VRx product page at www.reichert.com. Actual components may differ in appearance from those depicted here. Wireless Dongle Wireless Dongle AC-Power Supply w/ Plug Adapter Wireless Dongle DB9 Programming Cable Adapter Set Serial Extension Cable 0.76 m (2.5 ft) Serial to USB Adapter Hook and Loop Fasteners Cable Tie Mount (2) Cable Tie (2) 3 1 2 4 5 6 7 8 1 2 3 6 7 5 4 8 9 9 Wireless Dongle Kit configuration options: Some Wireless Dongle Kits will connect directly to an instrument using only the Adapter Set configuration, while other Wireless Dongle Kits will connect to an instrument using only the Extension Cable configuration. In some instances a Wireless Dongle Kit can connect to an instrument using either configuration. For those installations it is up to the user to decide whether you prefer to connect directly using the Adapter Set or if you prefer to use the Extension Cable to hide the Wireless Dongle from view behind a counter or under an instrument table. Follow the instructions for your specific instrument installation. NOTE: Your Wireless Dongle Kit may be designed to connect in multiple configurations, so you may not use all the parts included in this kit for your specific installation. Connecting AL500: The AL500 Auto Lensometer® can use either the Adapter Set or the Extension Cable configuration to connect to the Wireless Dongle Kit. The serial port (A) on the side of the AL500 is where the Wireless Dongle will connect. In both configurations the Wireless Dongle will need to be powered by the AC-Power Supply. The Adapter Set configuration can be used for a direct connection to AL500. The Extension Cable configuration can be used to run the Wireless Dongle to a location hidden from view. Cable Tie Mounts and Cable Ties are provided to secure any cables or hide them from view. Fasteners are provided to adhere the Wireless Dongle to the desired location. (cont.) AL500 w/ serial port shown A Connecting AL500: (Continued from inside) Connecting to a computer: The Wireless Dongle can easily be connected to a Microsoft® Windows® computer using the Extension Cable configuration. You can plug the Serial Extension Cable directly into a computer’s serial port or you can plug the cable into a computer’s USB port using the provided Serial to USB Adapter. With either connection type the Wireless Dongle will need to be powered by the AC-Power Supply. Cable Tie Mounts and Cable Ties are provided to secure any cables or hide them from view. Fasteners are provided to adhere the Wireless Dongle to the desired location. AL500 w/ Adapter Set AL500 w/ Extension Cable 1 1 2 2 5 4