Relic Ana-Digi T205 Manuals

ENGLISH Ana-Digi T205, T206 (1 crown/3 pushers) Analog Time Setting 1. Pull crown out to position 2. 2. Turn crown clockwise to the correct time. 3. Return crown to position 1. Digital Time Setting 1. Press B to select time mode. 2. Press and hold A to enter setting mode, seconds will begin flashing. 3. Press C to advance digit. 4. Press A to set and advance to next setting value. 5. Setting sequence is seconds, minutes, hour, 12/24 hour format. 6. Press A to save and exit setting mode. Date Setting 1. Press B to select date mode. 2. Press and hold A to enter setting mode, hour will begin flashing. 3. Press C to advance digit. 4. Press A to set and advance to next setting value. 5. Setting sequence is date, month, weekday. 6. Press A to save and exit setting mode. Digital Alarm Setting 1. Press B to select alarm mode. 2. Press C to toggle alarm on/off. 3. Press and hold A to enter setting mode, hour will begin flashing. 4. Press C to advance hour. 5. Press A to set and advance to minute. 6. Press C to advance minutes. 7. Press A to save and exit setting mode. NOTE: Chime must be on to hear alarm. To turn chime on, enter time mode, and press A and C at the same time. Chronograph Mode 1. Press B to select chronograph mode. 2. Press C to start/stop the chronograph. 3. Press A to reset to zero. Split Time 1. For split time, press A while the chronograph is running. 2. Press A again to return to chronograph. 3. Press C to finalize timing. 4. Press A to reset to zero. 1 2 C A B 1 2 C A B