Renishaw MH8 Manuals

MH8 user's guide Documentation part number: H-1000-5190-06-B MH8 user's guide www.renishaw.com Issued 02 2020 1 General information © 2003 ‐ 2020 Renishaw plc. All rights reserved. This document may not be copied or reproduced in whole or in part, or transferred to any other media or language, by any means, without the prior written permission of Renishaw. The publication of material within this document does not imply freedom from the patent rights of Renishaw plc. Disclaimer RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT. Trademarks RENISHAW, the probe symbol used in the RENISHAW logo and REVO are registered trademarks of Renishaw plc in the United Kingdom and other countries. apply innovation and names and designations of other Renishaw products and technologies are trademarks of Renishaw plc or its subsidiaries. All brand names and product names used in this document are trade names, service marks, trademarks, or registered trademarks of their respective owners. All trademarks and trade names are acknowledged. WEEE The use of this symbol on Renishaw products and/or accompanying documentation indicates that the product should not be mixed with the general household waste upon disposal. It is the responsibility of the end user to dispose of this product at a designated collection point for waste electrical and electronic equipment (WEEE) to enable reuse or recycling. Correct disposal of this product will help save valuable resources and prevent potential negative effects on the environment. For more information, please contact your local waste disposal service or Renishaw distributor. Warranty Renishaw plc warrants its equipment for a limited period (as set out in our Standard Terms and Conditions of Sale) provided that it is installed exactly as defined in associated Renishaw documentation. Prior consent must be obtained from Renishaw if non-Renishaw equipment (e.g. interfaces and/or cabling) is to be used or substituted. Failure to comply with this will invalidate the Renishaw warranty. Claims under warranty must be made from authorised service centres only, which may be advised by the supplier or distributor. MH8 user's guide www.renishaw.com Issued 02 2020 2 Care of equipment Renishaw probes and associated systems are precision tools used for obtaining precise measurements and must therefore be treated with care. Changes to Renishaw products Renishaw reserves the right to improve, change or modify its hardware or software without incurring any obligations to make changes to Renishaw equipment previously sold. Packaging To aid end user recycling and disposal the materials used in the different components of the packaging are stated here: Packaging component Material 94/62/EC code 94/62/EC number Outer box Corrugated fibreboard PAP 20 Packaging insert Corrugated fibreboard PAP 20 Bag Low density Polyethylene LDPE 4 MH8 user's guide www.renishaw.com Issued 02 2020 3

H-1000-5190-04-A MH8 User’s Guide ����� Renishaw plc MH8 User’s Guide English - see Part 1 Manuel de l’utilisateur MH8 Français - voir patie 2 Benutzerhandbuch MH8 Deutsch - siehe Abschnitt Guida per l’utente MH8 Italiano - vedi Sez. MH8 User’s Guide i Safety GB WARNINGS Beware of unexpected movement. The user should remain outside of the full working envelope of Probe Head/Extension/Probe combinations. Handle and dispose of batteries according to the manufacturer's recommendations. Use only the recommended batteries. Do not allow the battery terminals to contact other metallic objects. For instructions regarding the safe cleaning of Renishaw products refer to the MAINTENANCE section of the relevant product documentation. Remove power before performing any maintenance operations. Refer to the machine supplier's operating instructions. F AVERTISEMENTS Attention aux mouvements brusques. L'utilisateur doit toujours rester en dehors de la zone de sécurité des installations multiples Tête de Palpeur/Rallonge/Palpeur. Suivre les conseils du fabricant pour manipuler et jeter les batteries. Utiliser uniquement les batteries recommandées. Veiller à ce que les bornes de la batterie n’entrent pas en contact avec d’autres objets métalliques. Les conseils de nettoyage en toute sécurité des produits Renishaw figurent dans la section MAINTENANCE de votre documentation. Mettre la machine hors tension avant d'entreprendre toute opération de maintenance. Consulter le mode d’emploi du fournisseur de la machine.

Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH6, PH6M Document part number H-1000-5021-08-B Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH6, PH6M www.renishaw.com Issued 10 2019 1 General information © 1987 ‐ 2019 Renishaw plc. All rights reserved. This document may not be copied or reproduced in whole or in part, or transferred to any other media or language, by any means, without the prior written permission of Renishaw. The publication of material within this document does not imply freedom from the patent rights of Renishaw plc. Disclaimer RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT. Trademarks RENISHAW, the probe symbol used in the RENISHAW logo and REVO are registered trademarks of Renishaw plc in the United Kingdom and other countries. apply innovation and names and designations of other Renishaw products and technologies are trademarks of Renishaw plc or its subsidiaries. All brand names and product names used in this document are trade names, service marks, trademarks, or registered trademarks of their respective owners. All trademarks and trade names are acknowledged. WEEE The use of this symbol on Renishaw products and/or accompanying documentation indicates that the product should not be mixed with the general household waste upon disposal. It is the responsibility of the end user to dispose of this product at a designated collection point for waste electrical and electronic equipment (WEEE) to enable reuse or recycling. Correct disposal of this product will help save valuable resources and prevent potential negative effects on the environment. For more information, please contact your local waste disposal service or Renishaw distributor. Warranty Renishaw plc warrants its equipment for a limited period (as set out in our Standard Terms and Conditions of Sale) provided that it is installed exactly as defined in associated Renishaw documentation. Prior consent must be obtained from Renishaw if non-Renishaw equipment (e.g. interfaces and/or cabling) is to be used or substituted. Failure to comply with this will invalidate the Renishaw warranty. Claims under warranty must be made from authorised service centres only, which may be advised by the supplier or distributor. Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH6, PH6M www.renishaw.com Issued 10 2019 2 Care of equipment Renishaw probes and associated systems are precision tools used for obtaining precise measurements and must therefore be treated with care. Changes to Renishaw products Renishaw reserves the right to improve, change or modify its hardware or software without incurring any obligations to make changes to Renishaw equipment previously sold. Packaging To aid end user recycling and disposal the materials used in the different components of the packaging are stated here: Packaging component Material 94/62/EC code 94/62/EC number Outer box Corrugated fibreboard PAP 20 Outer box Non-corrugated fibreboard PAP 21 Outer box Polypropylene PP 5 Packing foam Polyurethane PU 7 Bag Low density Polyethylene LDPE 4 Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH6, PH6M www.renishaw.com Issued 10 2019 3 Product compliance EU declaration of conformity Contact Renishaw plc or visit www.renishaw.com/EU for the full EU declaration. EMC conformity This equipment must be installed and used in accordance with this installation guide. This product is intended for industrial use only and should not be used in a residential area or connected to a low voltage power supply network which supplies buildings used for residential purposes. REACH regulation Information required by Article 33﴾1﴿ of Regulation ﴾EC﴿ No. 1907/2006 ﴾“REACH”﴿ relating to products containing substances of very high concern (SVHCs) is available at: www.renishaw.com/REACH China RoHS Contact Renishaw plc or visit www.renishaw.com/ChinaRoHS for the full China RoHS tabulation. Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH6, PH6M www.renishaw.com Issued 10 2019 4

Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH5, PH6, PH6M Document part number H-1000-5021-07-A Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH5, PH6, PH6M http://www.renishaw.com Issued 11 2014 1 General information © 1987 ­ 2014 Renishaw plc. All rights reserved. This document may not be copied or reproduced in whole or in part, or transferred to any other media or language, by any means, without the prior written permission of Renishaw. The publication of material within this document does not imply freedom from the patent rights of Renishaw plc. Disclaimer RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT. Trademarks RENISHAW® and the probe emblem used in the RENISHAW logo are registered trademarks of Renishaw plc in the UK and other countries. apply innovation is a trademark of Renishaw plc. All brand names and product names used in this document are trade names, service marks, trademarks, or registered trademarks of their respective owners. Windows XP, Windows 2000, Vista and Windows 7 are registered trade names of the Microsoft Corporation. All trademarks and trade names are acknowledged. WEEE The use of this symbol on Renishaw products and/or accompanying documentation indicates that the product should not be mixed with the general household waste upon disposal. It is the responsibility of the end user to dispose of this product at a designated collection point for waste electrical and electronic equipment (WEEE) to enable reuse or recycling. Correct disposal of this product will help save valuable resources and prevent potential negative effects on the environment. For more information, please contact your local waste disposal service or Renishaw distributor. Warranty Renishaw plc warrants its equipment for a limited period (as set out in our Standard Terms and Conditions of Sale) provided that it is installed exactly as defined in associated Renishaw documentation. Prior consent must be obtained from Renishaw if non-Renishaw equipment (e.g. interfaces and/or cabling) is to be used or substituted. Failure to comply with this will invalidate the Renishaw warranty. Claims under warranty must be made from authorised service centres only, which may be advised by the supplier or distributor. Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH5, PH6, PH6M http://www.renishaw.com Issued 11 2014 2 Care of equipment Renishaw probes and associated systems are precision tools used for obtaining precise measurements and must therefore be treated with care. Changes to Renishaw products Renishaw reserves the right to improve, change or modify its hardware or software without incurring any obligations to make changes to Renishaw equipment previously sold. Touch-trigger probe systems - TP1, TP2, TP6, TP6A, PH1, PH5, PH6, PH6M http://www.renishaw.com Issued 11 2014 3