ResMed AirFit F20 Manuals

English 1 Disinfection and sterilisation guide Clinical use only This guide is intended for multipatient use of the AirFit™ F20/ AirFit™ F20 for Her ResMed full face mask in a sleep lab, clinic or hospital. If you use the mask as a single user in the home, refer to the User Guide for cleaning instructions. This guide describes ResMed’s recommended and validated procedures for cleaning, disinfection and sterilisation of the mask in accordance with ISO17664. AirFit F20 / AirFit F20 for Her mask component1 Thermal disinfection Chemical disinfection Sterilisation Validated number of cycles2 Manual AWD3 CIDEX™ OPA Gigasept FF STERRAD™ 100S STERRAD™ NX • Cushion 30 • Headgear – – – 30 • Elbow – – – 30 • Frame – – – – 30 1 This mask may not be available in all regions. For full details regarding the correct use of these masks, please refer to the specific User Guide. For a list of available replacement parts for each mask system, check the Components Card on www.resmed.com. 2 If a healthcare facility requires an additional disinfection or sterilisation cycle after reassembly, the number of validated cycles must be halved. 3 Automatic Washer-Disinfector A Elbow 1 Valve (AAV) 2 Vent 3 Side buttons 4 Swivel B Frame C Cushion D Headgear 5 Magnetic clips 6 Lower headgear straps 7 Upper headgear straps A+B+C Frame system A+B+C+D Complete system A 1 2 3 4 B C 5 6 7 D

English 1 Disinfection and sterilization guide Clinical use only This guide is intended for multipatient use of the AirFit™ F20 / AirTouch™ F20 ResMed full face mask in a sleep lab, clinic or hospital. If you use the mask as a single user in the home, refer to the User Guide for cleaning instructions. This guide describes ResMed’s recommended and validated procedures for cleaning, disinfection and sterilization of the mask in accordance with ISO17664. AirFit F20 / AirTouch F20 mask component1 High level thermal disinfection High level chemical disinfection Sterilization Validated number of cycles2 167°F (75°C)-30 min; 176°F (80°C)-10 min; 194°F (90°C)-1 min 200°F (93°C)-10 min CIDEX™ OPA Ortho-phthalaldehyde 0.55% STERRAD™ 100S STERRAD™ NX Standard or Advanced cycle • AirFit F20 cushion 30 • AirTouch F20 cushion3 — — — — — N/V4 • Elbow — — — 30 • Frame — — — 30 • Headgear — — — — 30 1 This mask may not be available in all regions. For full details regarding the correct use of this mask, please refer to the specific User Guide. For a list of available replacement parts for each mask system, check the Components Card on www.resmed.com. 2 If a healthcare facility requires an additional disinfection or sterilization cycle after reassembly, the number of validated cycles must be halved. 3 The AirTouch F20 cushion is intended for single-patient reuse in both home and hospital/institutional environments and recommended to be replaced monthly. 4 Not validated. A 1 2 3 4 B C 5 6 7 D A Elbow 1 Valve (AAV) 2 Vent 3 Side buttons 4 Swivel B Frame C Cushion D Headgear 5 Magnetic clips 6 Lower headgear straps 7 Upper headgear straps A+B+C Frame system A+B+C+D Complete system

User guide Full face mask User guide English QuietAir

User guide Full face mask User guide English

Full face mask User guide English | Deutsch Français | Italiano Nederlands | ﺔﯿﺑﺮﻌﻟا QuietAir

User guide English | Deutsch | Français Italiano | Nederlands | Svenska Suomi | Norsk | Español Full face mask QuietAir

Full face mask User guide English | Español | Português | Ελληνικά | Türkçe | Polski | Magyar | Română | Български | Česky