Resolution Products RE224GH Manuals

RE224GH GE-to-Honeywell Translator.doc Page 1 of 4 1/8/2010 www.ResolutionProducts.com Wireless Security Solutions RE224GH GE-to-Honeywell Wireless Translator Features • Listens to GE protocol wireless devices: DWS, PIR, Fob, Panic. • Transmits Honeywell protocol wireless. • No sensor enrollment required. • All alarm, supervisory and trouble signals are passed through. • Main device has its own unique ID for supervisories, complete reporting of main device tamper, external power supply fault and low battery. • Dual antennas for both Receive and Transmit diversity for reliable range. • Back-up battery protects during loss of external power. Key Instructions • External supply: 9-18V AC or DC, recommend 30+ mA. • 3 AAA Alkaline batteries are for backup in case of external supply failure. • Enrolling: � Main device may be learned into the panel by tripping the tamper. Main device does not need to be enrolled in the panel for the repeating function to work. � GE sensors may be enrolled into Honeywell system using the tripping enrollment mode. They are not enrolled in the Translator. Operation • Translator hears existing GE protocol sensors and repeats information in Honeywell protocol to control panel. Generally, sensors send 8 identical “packets” of information. The Translator ensures that a complete set of 8 packets are repeated to the control panel. • Translator Main Zone wireless transmission ( unique ID): Tamper, when cover opened OR loss of AC. Also sends restore. Low battery, when low or removed batteries. Also sends restore. Supervisory sent every hour. We may want to have known IDs that they can plug into the panel. RE224GH GE-to-Honeywell Translator.doc Page 2 of 4 1/8/2010 www.ResolutionProducts.com • LED Operation � Green LED • On if AC power present. • Blinks on receipt of GE-compatible packets. � Red LED • On if device low battery (unless there’s no AC power). • Blinks on transmit of Honeywell-compatible packets. • Application Diagram � Because the Translator has two antennas, for both receive and transmit diversity, it will generally have better range than all sensors, and many panels (particularly those with internal antennas). � Place the Translator generally in the center of the all the existing sensors it needs to hear. It will have no problem reaching the control panel. New Honeywell System New Honeywell Wireless Sensors Existing GE Wireless Sensors RE224GH GE-to-Honeywell Translator.doc Page 3 of 4 1/8/2010 www.ResolutionProducts.com Specifications GE Device Types: Hears and translates DWS, PIR, Fob, Panic. Backup batteries: Three AAA Alkaline. External supply: 9-18V AC or DC, uses 15mA nominally. AC Fail Conditions: AC gone. Restores on AC restore. Device Low Battery: Low battery detected within 30 seconds. Restores on device tamper OR on AC restore. Back-up Battery Life on AC Fail: 72 hours. Housing dimensions: 4x6x1 inches Specifications subject to change without notice. Internal Picture Power Terminals Tamper Switch & spring Unused: Device Type Indicator LEDs and Enrollment button Battery bucket for 3 AAA alkalines Indicator LEDs & buzzer 2 Antennas for: Dual Diversity Receive and Dual Diversity Transmit Note: Antennas mounted on outer terminals RE224GH GE-to-Honeywell Translator.doc Page 4 of 4 1/8/2010 www.ResolutionProducts.com Notices “GE”, “Honeywell”, and “DSC” are trademarks owned by General Electric Company, Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively. Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC. Resolution recommends verifying operation at installation. Warranty Resolution Products, Inc. will replace products that are defective in their first year. FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Engineering, Inc. could void the user's authority to operate this equipment. FCC ID: U5X-RE224GH [pending] IC Notice This product meets the applicable Industry Canada technical specifications/Le présent materiel est conforme aux specifications techniques applicables d’Industrie Canada. IC: 8310A-RE224GH [pending]

RE224GH_GE-to-Honeywell_Translator.doc Page 1 of 4 6/9/2011 www.ResolutionProducts.com Wireless Security Solutions RE224GH GE®-to-Honeywell® Wireless Translator™ Features • Listens to GE protocol wireless devices: DWS, PIR, Glass Break, Fob, Panic. • Transmits Honeywell protocol wireless. • No sensor enrollment required. • All sensor alarm, supervisory and trouble signals are passed through. • Main device has its own unique ID for supervisories, complete reporting of main device tamper, external power supply fault and low battery. • Dual antennas for both Receive and Transmit diversity for reliable range. • Back-up battery protects during loss of external power. Key Instructions • External supply: 12V DC at least 50 mA. • 3 AAA Alkaline batteries give 72 hours backup if external supply fails. INSTALL BATTERIES ONLY WHEN EXTERNAL SUPPLY IS READY TO CONNECT. • Enrolling: � Power the Translator. It starts translating immediately. Sensors are NOT enrolled in the Translator. � GE sensors may be enrolled into Honeywell system using the tripping enrollment mode. They are not enrolled in the Translator. � Enroll the Translator into a zone, because it sends check-in supervisories, cover tamper and low battery messages. • Zone Type: 8 (24 hour Aux) – When cover opened: “fault” when system not armed, “alarm” when system armed. • Input Type: 3 (Supervised RF), Loop: 1 • When prompted, toggle the tamper switch to enroll the serial number. Operation • Existing GE protocol sensors transmit as usual. Translator passes information on to control panel as if they were Honeywell transmitters. • GE Fob buttons: Lock/Unlock/Light/Star, Lock + Unlock translate to Honeywell Buttons: Off/On/Left/nothing, Right [Loops 2/3/4/nothing, 1] RE224GH_GE-to-Honeywell_Translator.doc Page 2 of 4 6/9/2011 www.ResolutionProducts.com Translator Main Zone wireless transmission ( unique ID): Tamper, when cover opened. Also sends restore. Low battery, when low battery. Also sends restore. Supervisory every hour. Supervisory stopped if 12V DC power absent. • LED Operation � Green LED • On if 12V DC power present. • Blinks on receipt of GE-compatible packets. � Red LED • On if device low battery (unless there’s no 12V DC power). • Blinks on transmit of Honeywell-compatible packets. • Application Diagram � Because the Translator has two antennas, for both receive and transmit diversity, it will generally have better range than all sensors, and many panels (particularly those with internal antennas). � Place the Translator generally in the center of the all the existing sensors it needs to hear. It will have no problem reaching the control panel. New Honeywell System New Honeywell Wireless Sensors Existing GE Wireless Sensors RE224GH_GE-to-Honeywell_Translator.doc Page 3 of 4 6/9/2011 www.ResolutionProducts.com Specifications GE Device Types: Hears and translates DWS, PIR, Glass Break, Fob, Panic. Receiver and Transmitter: Listens to SAW and crystal transmitters. Talks to SAW receivers. Backup batteries: Three AAA Alkaline. External supply: 12V DC, at least 50mA. Current draw with supply: 4mA, normal operation. Power Fail Conditions: 12V DC gone. Translator device ID supervisories (including low battery reports) are stopped during 12V DC loss. Back-up Battery Life on 12V DC Fail: 72 hours (cumulative). Device Low Battery: When approximately 48 hours remain in back-up. Housing dimensions: 4x6x1 inches Specifications subject to change without notice. Internal Picture Power Terminals Tamper Switch & spring Battery bucket for 3 AAA alkalines Indicator LEDs & buzzer 2 Antennas for: Dual Diversity Receive and Dual Diversity Transmit Note: Antennas mounted on outer terminals RE224GH_GE-to-Honeywell_Translator.doc Page 4 of 4 6/9/2011 www.ResolutionProducts.com Notices “GE”, “Honeywell”, and “DSC” are trademarks owned by General Electric Company, Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively. Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation. Do not use Translator for life safety devices, such as smoke or CO sensors. Warranty Resolution Products, Inc. will replace products that are defective in their first year. FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment. FCC ID: U5X-RE224 IC Notice This product meets the applicable Industry Canada technical specifications/Le présent materiel est conforme aux specifications techniques applicables d’Industrie Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device has been designed to operate with the antennas listed below, and having a maximum gain of 2 dBi. Antennas not included in this list or having a gain greater than 2 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. - Resolution-supplied 8.5" monopole antenna IC: 8310A-RE224 Patents Patent Pending.