Resolution RE119 Manuals

RE119_GE_Flood_Temp_Instructions Page 1 of 4 27-Jan-15 24-Hour Tech Support Line: (715)808-0164 www.ResolutionProducts.com RE119 Flood/Temp Range, GE®-Compatible Home Disaster™ Sensor Features • Tri-Mode Environmental Sensing: o Flood/Moisture Sensor o Freeze – for Furnace Failure o Overheat – for Furnace runaway or Air Conditioning failure. • 3 unique wireless IDs or Loops: one for each function • Cover tamper. • Strong, reliable RF signal. • 8-10 year battery life on CR123A battery. • Low Battery indication. • 3.3x1.4x1.1 inches. Key Instructions • Battery “+” faces towards spring. • Activating Zones � Flood Zone operates on unit when it comes from the factory. The enrolling actions (listed next) activate the Freeze and Overheat Zones. � ACTIVATE ONLY THE ZONES YOU NEED (In order to extend battery life and prevent RF pollution): • Enrolling: Place control panel in enroll mode… then for… � Flood - Zone 0: RF DL ID ends in “0” (this RF DL ID is printed on sensor): � Enroll by: • …pressing & releasing Tamper � Sensor sends Flood Alarm & enrolls. � Freeze - Zone 1: RF DL ID ends in “1”: � Enroll by: • Holding Tamper down, • Leaving magnet away from Reed Switch, • …while installing battery. � Sensor sends Freeze-Alarm & enrolls. � Overheat – Zone 2: RF DL ID ends in “2”: � Enroll by: • Holding Tamper down, • Having magnet next to Reed Switch, • …while installing battery. • � Sensor sends Overheat Alarm & enrolls. RE119_GE_Flood_Temp_Instructions Page 2 of 4 27-Jan-15 24-Hour Tech Support Line: (715)808-0164 www.ResolutionProducts.com Operation • Flood (1st ID ending in 0) Alarm: when liquid rises 0.040 inches above sensor bottom. Tamper: when cover is opened. Supervisory: every hour. • Freeze (2nd ID ending in 1) Alarm: when room temperature drops below 40F. Tamper: when cover is opened. Supervisory: every hour. • Overheat (3rd ID ending in 2) Alarm: when room temperature rises above 100F. Tamper: when cover is opened. Supervisory: every hour.