Resolution RE218 Manuals

RE218 Honeywell ® Compatible Trident ™ Environmental Sensor Trident is an integrated environmental sensor. It detects water and reports extreme temperature conditions. Features •  Titanium probes for unmatched corrosion immunity •  IP67 rated waterproof enclosure •  GORE® vent equalizes enclosure pressure •  5 year warranty Enroll by placing the panel into wireless enrollment mode and removing the battery tabs or tampering the sensor. Loop Configuration •  Loop 1 = Heat •  Loop 2 = Flood •  Loop 3 = Freeze •  Loop 4 = Tamper Install by placing the sensor in the location requiring water or air temperature detection. If desired, the wall clip can be used to secure the Trident sensor. Optional Wall Clip Securing •  Remove the Trident body from wall clip. •  Secure wall clip to a surface with a #6 mounting screw. •  Example securing locations: wall, baseboard or Optional Wall Clip Securing •  Remove the Trident body from wall clip. •  Secure wall clip to a wall with a #6 screw. •  Example securing locations are a wall, baseboard or cupboard. Detects water pooled under the sensor and reports extreme air temperature conditions. Temperature Trip Points •  Heat larms when over 100.4° F (38° C) •  Heat restores when under 96.8° F (36° C) •  Freeze alarms when under 44.6° F (7° C) •  Freeze restores when over 48.2° F (9° C) To replace the battery, insert a flat blade screwdriver into the front slot and twist. To reinstall the cover, align the rear latches and roll the cover forward until it snaps into place. I N S T A L L G U I D E I Mounting Screw Hole Front slot Wall Clip Verify proper enrollment and operation using your control panel’s installation manual.