ReSound ONE Manuals

Issue Solutions Notes Detecting the hearing aids to initiate pairing If the streaming signal cannot be initiated… If streaming signal cannot be initiated or quits during use… 1. Replace the hearing aid batteries 2. Verify that you are using the latest iOS version and update as Helpful Hints for your Made for iPhone Hearing Aids 1. Shut down and restart your iPhone®, iPad® or iPod touch® occasionally. Like a computer, your device needs a reboot on occasion for optimum performance. 2. Close down apps that are not in use. Double-click the home button > Swipe up to close apps (simply pressing the home button does not actually close the app on your phone; it will continue to run in the background). 3. Turn off Bluetooth on other Apple devices that are within range and have been previously paired to your hearing aids. 1. Go back to “Accessibility” screen on the Apple device 2. Re-enter the “Hearing Aids” screen to detect devices 3. Reboot the hearing aids or try new batteries needed 1. Check the audio source (which is visible during phone calls) 2. Or swipe up to view AirPlay to ensure the audio signal is being directed to the hearing aids.

Fitting flow FOR PROFESSIONALS ReSound ONE

Truly wireless fitting (no cable required) 3-pin CS53 flex strip and 4-pin CS44 socket cable Programming Adaptor II and 4-pin CS44 socket cable ENZO Programming Adaptor 19215000 Fresh battery Fresh battery Fresh battery Fresh battery ReSound ONE™ RIE - - - ReSound LiNX Quattro™ Custom, RIE, BTE Custom, RIE: 61, Mini BTE: 67 RIE: 62, BTE - ReSound LiNX Quattro™ Rechargeable RIE 61-DRWC - - - ReSound ENZO Q™ BTE - BTE: 88 BTE: 98 ReSound Key™ Custom, RIE, BTE Custom, RIE: 61, Mini BTE: 67 RIE: 62, BTE: 77, 88 BTE: 98 ReSound Smart Fit cable guide Cable connection for non-wireless programming Wireless and non-wireless programming CUSTOM MODELS With the battery door ajar, insert the flex strip into the slot beside the hinge pin. The black dot on the flex strip should be facing away from the battery door. The flex strip is fully inserted when the black dot abuts the hearing instrument case. Close the battery door once the flex strip is inserted. RIE: 61 Locate the programming slot below the push-button. Open the battery door. With the black dot on the flex strip facing the push button on the hearing instrument, insert the flex strip into the slot and close the battery door. MINI BTE: 67 Locate the programming slot below the microphone port. With the black dot on the flex strip facing the push button on the hearing instrument, insert the flex strip into the slot, until the black dot abuts the hearing instrument case. RIE: 62 and BTE MODELS To connect the programming adaptor, hold it at a 45° angle and insert the small pins at the tip of the adaptor into the square cut-out on the underside of the hearing instrument. Once in place, move the adaptor in the direction of the battery compartment and then gently click it into place. BTE: 98 Remove the existing battery door and replace with the DAI/battery door (19215000). (original adaptor) 4 (ENZO adaptor) 5 5

resound.com User guide ReSound Behind-The-Ear hearing aids, Rechargeable