Assembly instructions [PDF] (4 pages)
- Updated: 27.06.2026
Document Preview & Text Transcription
Semi Gloss Black
Flat Red
Copper
Tan
Flat White
Dark Gray
Light Gray
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Noir satiné
Rouge mat
Cuivre
Havane
Blanc mat
Gris foncé
Gris clair
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECal aPPliCaTiOn inSTRUCTiOnS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
nOTE: Decals are compatible with
setting solutions or solvents.
REaD THiS BEFORE YOU BEGin
liRE CE QUi SUiT aVanT DE COMMEnCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DiRECTiVES D'aPPliCaTiOn DES aUTOCOllanTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMaRQUE: les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
The U.S.S. Buckley Destroyer Escort
(DE 51) was assigned to the North
Atlantic to protect vulnerable merchant
vessel convoys from the ever present
threat of German submarines. On May
6th, 1944 the USS Buckley rammed
and sunk the German submarine U-66
after making contact with the sub
while it was running on the surface.
Your Revell model features a detailed
deck, superstructure, hull, propellers
and shafts plus a display stand. Also
included is armament, deck mounted
torpedo tubes, depth charges, three 3"
guns, eight 20mm guns, one twin 40mm
gun and authentic decal markings.
U.S.S. BUCklEY
DESTROYER ESCORT
KIT 3013 85301300200
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85301300200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
HUll aSSEMBlY
1
Main DECk aSSEMBlY
2
5
STAND
SEMI GLOSS
BLACK
38R
RIGHT
STACK HALF
DARK GRAY
39L
LEFT
STACK HALF
DARK GRAY
(SHADED AREA
LIGHT GRAY)
37
3" LOADER
SEMI GLOSS BLACK
1
PROPELLER
COPPER
4
RUDDER
FLAT RED
3
HULL
FLAT RED
DARK GRAY
LIGHT GRAY
SHADED AREA SEMI
GLOSS BLACK
16
40MM GUN TUB
DARK GRAY
18
CAP
17
TORPEDO TUBES
DARK GRAY
6
SUPERSTRUCTURE
FRONT
DARK GRAY
15
FORWARD
GUN TUB
DARK GRAY
14
ROCKET LAUNCHER
DARK GRAY
7
DECK
DARK GRAY
TAN
(DECK ROPE)
TAN
(DECK ROPE)
TAN
(DECK ROPE)
8R
RIGHT SUPERSTRUCTURE SIDE
DARK GRAY
9L
LEFT SUPERSTRUCTURE SIDE
DARK GRAY
11L
LEFT MIDSHIP SUPERSTRUCTURE
DARK GRAY
10R
RIGHT MIDSHIP SUPERSTRUCTURE
DARK GRAY
13L
LEFT
AFT GUN TUB SIDE
DARK GRAY
12R
RIGHT
AFT GUN
TUB SIDE
DARK GRAY
Kit 3013 - Page 2
NOTE: USE HOUSEHOLD THREAD FOR RIGGING (NOT INCLUDED)
*
2
PROPELLER
SHAFT
FLAT RED
LIGHT
GRAY
*
Final aSSEMBlY
4
UPPER DECk aSSEMBlY
3
25
20MM GUN
SEMI GLOSS BLACK
(SHOWN IN PLACE)
25
20MM GUN
SEMI GLOSS BLACK
35
LADDERS
DARK GRAY
36
STAIR
DARK GRAY
(SHOWN IN PLACE)
26
3" GUN
SEMI GLOSS BLACK
29
SEARCH LIGHTS
DARK GRAY
24
GUN DECK
DARK GRAY
32
UPPER DECK
DARK GRAY
34
GUN DIRECTOR
DARK GRAY
23
NAVIGATION DECK
FRONT
DARK GRAY
28
NAVIGATION DECK
DARK GRAY
33
STEERING
STATION FRONT
DARK GRAY
30R
RIGHT STEERING
STATION WALL
DARK GRAY
31L
LEFT STEERING
STATION WALL
DARK GRAY
27
SUPERSTRUCTURE
BACK
DARK GRAY
47R
DEPTH
CHARGE RACK
LIGHT GRAY
48L
DEPTH
CHARGE
RACK
LIGHT GRAY
57
MAIN DECK
LIFE RAFT
LIGHT GRAY
52R
RIGHT
SPRAY SHIELD
DARK GRAY
(SEE STEP 2 FOR
THREAD NOTE)
53L
LEFT
SPRAY SHIELD
DARK GRAY
43
TORPEDO LOADING
CRANE
DARK GRAY
(SHOWN IN PLACE)
46
DEPTH
CHARGE
DAVIT
DARK GRAY
44R
40MM TWIN GUN
RIGHT HALF
SEMI GLOSS BLACK
45L
40MM TWIN GUN
LEFT HALF
SEMI GLOSS BLACK
40
COMPASS
DARK GRAY
41
RIGHT
40MM GUN
DIRECTOR
DARK GRAY
42
LEFT
40MM GUN
DIRECTOR
DARK GRAY
51
RANGE
FINDER
SUPPORT
DARK GRAY
50
RANGE
FINDER
DARK GRAY
56
WHALE BOAT HULL
LIGHT GRAY
55
WHALE
BOAT CABIN
FLAT WHITE
49
SUPERSTRUCTURE
LIFE RAFT
LIGHT GRAY
54
BOAT DAVIT
DARK GRAY
48L
DEPTH
CHARGE RACK
LIGHT GRAY
47R
DEPTH
CHARGE
RACK
LIGHT GRAY
21R
RIGHT REAR RAIL
DARK GRAY
(SEE STEP 2 FOR THREAD NOTE)
19R
RIGHT FORWARD RAIL
DARK GRAY
(SEE STEP 2 FOR THREAD NOTE)
20L
LEFT FORWARD RAIL
DARK GRAY
22L
LEFT REAR RAIL
DARK GRAY
Kit 3013 - Page 3
TAN
(DECK
ROPE)
Pages Preview: