REVER MCX1 Manuals

10644 03/15 REVER MCX1 MECHANICAL BRAKE INSTRUCTIONS Thank you for choosing the Rever MCX1 brake system. To ensure the best performance and reliability, please follow the instructions provided. If you have any questions please contact an authorized dealer or Rever representative. Enjoy and ride safely. WARNING: CYCLING CAN BE DANGEROUS.  BICYCLE PRODUCTS SHOULD BE INSTALLED AND SERVICED BY A PROFESSIONAL MECHANIC.  NEVER MODIFY YOUR BICYCLE OR ACCESSORIES.  READ AND FOLLOW ALL PRODUCT INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION ON THE MANUFACTURER’S WEBSITE. INSPECT YOUR BICYCLE BEFORE EVERY RIDE.  ALWAYS WEAR A HELMET. Additional Product and Safety Information can be found at —ride-rever.com/safety INTENDED USE ASTM Condition 2: Smooth pavement to smooth gravel roads and groomed trails with low-angle grades and drop offs of less than 6" (15cm). COMPATIBILITY Brake Levers: The MCX1 caliper is compatible with any short-pull, dropbar lever designed for cyclocross and road riding. Frame and Fork: The MCX1 caliper features a 74mm Post Mount. It will work with most frames and forks and either 140mm or 160mm rotors, but may require the use of an adapter. INCLUDED HARDWARE Qty Description 1 Caliper 1 Single-piece rotor, 6-bolt, 160mm 2 Disc brake pad 1 140/160mm I.S. adapter 1 160mm PM adapter 1 Kevlar®-reinforced housing with EZ Bend TOOLS NEEDED • Cable and housing cutter • Cable crimper • Awl • 3mm hex wrench • 5mm hex wrench • T25 Torx wrench • Torque wrench Usage Location Tool Caliper fixing bolt 5mm hex wrench Cable fixing bolt 5mm hex wrench Pad adjustment screws (inboard and outboard) 3mm hex wrench Pad spring fixing bolt 3mm hex wrench Rotor mounting bolts T25 Torx wrench Fork Configuration Rotor Size Adapter Needed 140mm Post Mount 160mm 160mm Post/Post Adapter (included) 160mm Post Mount 160mm None—direct fit 51mm I.S. Tab 160mm 160mm Rever Post/IS Adapter (included) Frame Configuration 140mm Post Mount 140mm None—direct fit 140mm Post Mount 160mm 160mm Post/Post Adapter 160mm Post Mount 160mm None—direct fit 51mm I.S. Tab 140mm 140mm Rever Post/IS Adapter (included) Qty Description 1 Ultra-slick stainless cable 1 Indexed inline brake adjuster 1 Hooded end cap 2 Lined end cap 2 Cable tip 4 Mini tube top 1 T-25 Torx wrench