RFS 48810A Manuals

48810A & 48810B User's Manual 200 Pondview Drive, Meriden, CT 06450 • (877) 737-9675 • Fax (203) 821-3852 www.rfsworld.com Disclaimer All information and statements contained herein are accurate to the best of the knowledge of Radio Frequency Systems, but Radio Frequency Systems does not make any warranty with respect thereto, including without limitation any results, which may be obtained from the products described herein or the infringement by such products of any proprietary rights of any persons. Use or application of such information or statements is at the user’s sole risk, without any liability on the part of Radio Frequency Systems. Nothing herein shall be construed as license of or recommendation for use, which infringes upon any proprietary rights of any person. Product material and specifications are subject to change without notice. All sales of the products described herein are subject to Radio Frequency System's standard terms of sale and the specific terms of any particular sale. Table of Contents General Statements 1 Maximum Permissible Exposure Limits 2 Product Overview 3 Field Tune-up, Alignment or Calibration 3 FCC ID and Canada Certification Numbers 3 Theory of Operation 3 Electrical Specifications 4 Mechanical Specifications 4 Environmental Specifications 4 Intermodulation, Power, and AGC 4 AGC Automatic Shutdown 5 Manual Gain Adjustment 5 AC/DC Power 6 Grounding and Surge Protection 6 Antenna Isolation 6 Installation 7 Diagnostics/Troubleshooting 8 Test Points 9 Component Location 11 Maintenance, Repair and Warranty 12 Periodic Maintenance 12 Ordering and Returning Components 12 General Statements Thank you for selecting this RFS product. We are confident that you will find this product in proper working order, meeting all stated specifications. If not, please contact customer service immediately at 1-800-321-4700 and we will resolve the issue without hesitation. Please read this manual. A full understanding of product operation will support optimal performance and prevent accidental damage not covered by the stated warranty. ƒ Do not operate this product without proper loads on both antenna ports. You must connect both antenna ports to an antenna or a 50-Ohm load, rated for at least 1 watt. ƒ These products receive and amplify RF signals in the 1900 MHz PCS band. As such, these products are intended for use by the licensee of the respective service and should not be used without the expressed permission of the licensee. The 48810 PCS Band Repeater can be used to cover indoor or outdoor areas. It is designed and optimized for low cost, high reliability, and ease of use. This manual provides information on the proper operation and care of the repeater, however, Radio Frequency Systems can provide the total package of components and hardware for any type of repeater installation. See our catalog for the full line of antennas, coaxial cables, and accessories at www.rfsamericas.com. For assistance with this repeater installation and/or design of the distribution network to get the best coverage possible contact RFS Applications Engineering at 1-800-659-1880 48810 Ground Kit Wall/ Roof Feedthru 1/2" or 7/8" Coaxial cable Distribution Network Surge Arrestor Jumpers Base Service Radiaflex 1/2" Plenum Riser Rated Coax 1/2 or 7/8" Cable Taps 1/2" Plenum Coax Donor Antenna Hangers and Standoffs In-building Antennas In-band or Cross-band Combiners 2, 3, or 4 Way Splitters 1