RH Teen TEXTURED METAL DOUBLE TASK SCONCE Manuals

TEXTURED METAL DOUBLE TASK SCONCE – ASSEMBLY INSTRUCTIONS PARTS ENCLOSED: (A) Wall Anchors (2) (F) Bottom Cord Cover (1) (B) Mounting Plate (1) (G) ON-OFF Press Switch (C) Wall Screws (2) (H) Plate Screws (4) (D) Top Cord Cover (1) (I) Back Plate (1) (E) Plug (1) (J) Bulbs (2) TEXTURED METAL DOUBLE TASK SCONCE Plug-In Installation IMPORTANT SAFETY INSTRUCTIONS: The fixture can be used as a plug-in or a fixed unit when used with the appropriate conversion kit. For your safety, this sconce is equipped with a 3-pronged polarized plug. If the plug does not fit securely into your outlet, do not force it – contact a professional electrician. Use the plug with an extension cord only if it can be fully inserted into the cord's socket. Never alter the plug in any way. This fixture has been rated for up to (2) 4w max Type T LED bulbs (included) or (2) 40w max Type T incandescent bulbs (not included). To avoid the risk of fire, do not exceed the recommended wattage. WARNINGS: All wires are connected. When unpacking, be careful not to pull wires, as a bad connection may result. Do not connect electricity until the sconce is fully assembled. To reduce the risk of fire, electrical shock, or personal injury, always turn off and unplug fixture and allow it to cool prior to replacing lightbulb. Do not touch bulb when fixture is turned on or look directly at lit bulb. Keep flammable materials away from lit bulb. DO NOT REMOVE THE CARDBOARD INSULATOR SURROUNDING THE SOCKET. THIS PRODUCT IS NOT A TOY AND HAS NO PLAY VALUE. PLUG-IN ASSEMBLY INSTRUCTIONS: 1. Carefully remove all parts from the box and remove all plastic coverings. 2. Drill 2 holes in the wall that align with the holes on the mounting plate (B) of the lamp and insert wall anchors (A). 3. Place mounting plate (B) onto the wall anchors (A), then screw wall screws (C) into anchors. 4. Attach the back plate (I) to the mounting plate (B) and use the plate screws (H) to secure. 5. Screw the top cord cover (D) into the hole located on the bottom of the back plate (I). 6. Screw the bottom cord cover (F) into the top cord cover (D). 7. Insert (2) 4W-max type T bulbs (J) into the threaded sockets. 8. Insert plug (E) into proper electrical outlet and press ON/OFF switch (G) to test fixture. CARE INSTRUCTIONS: To clean, use a soft, dry cloth. Do not use polishes or cleaners on the fixture. WARNING: STRANGULATION HAZARD Keep cord at least 3 feet away from cribs, bassinets, and toddler beds. Keep out of reach of children under 3 years of age.