RHINO PSP Series Manuals

INSTALLATION INSTRUCTIONS PSP Series DC - DC Converters 27 (1.06) 2 . 2 ) 9 0 . 0 ( 100.0 (3.94) 0 . 5 7 ) 5 9 . 2 ( DC-ON LED Output voltage adjust INPUT 1 2 3 OUTPUT 1 2 Weight: 140g (4.9 oz) Tolerances: ±0.5mm (±0.02) 35 (1.38) RHINO Industrial Power Supplies PSP Series , DC - DC models Installation Instructions Rev: 06/18 1-800-633-0405 Rhino PSP Series DC - DC Converters General Specifications Output Specifications Input Specifications General Specifications Temperature Operating: -10°C to 70°C max (14°F to 158°F max); Storage (non-operating): -25°C to 85°C max, (-13°F to 185°F max); Derating: 1.5%/C above 50°C (122°F) Humidity (Non-condensing) 95 % relative humidity max. Temperature Coefficient 0.02 %/C Switching Frequency 55 – 180 kHz depending on load (frequency modulation) Isolation Voltage (1 min.) – Input/Output 1500 VDC Reliability, Calculated MTBF @ 25°C >2.5 Mio h (according to IEC-1709) Safety Standards IEC 60950-1, EN 60950-1 (output SELV), UL/cUL 60950-1, EN 60204 Electromagnetic Compatibility (EMC) Emissions: EN 61000-6-3; Immunity: EN 61000-6-2 Safety Class Degree of protection class 1 Parallel Operation No parallel operation Connections Screw type plug-in connector (standard). Recommended tightening torque 0.5 to 0.7 Nm (4.5 to 6.2 lb.in) Wiring 0.21mm2 - 3.16mm2 (AWG 24 to AWG 12) Enclosure Rating IP 20 (IEC 60529) Enclosure Material Plastic FR2010-110C (UL 94V-0 rated) Mounting DIN rails per EN 50022-35x15/7.5 (snap-on with self-locking spring) bracket for wall/chassis mount included Agency Approvals UL/cUL 508 Listed, File E197592, CE Note: All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications Part Number Input Voltage Range Input Current Power Consumption Startup Voltage Undervoltage Shut-down Efficiency (Typical) @ Vin = 12 VDC @ Vin = 12 VDC Iout = 0% Iout = 100% Iout = 0% Iout = 100% PSP**-DC12-* 9.5 to18.0 VDC 80mA max 2.5A max 0.96 watt typical 30 watt typical 8.4 VDC 7.6 VDC 86% @ Vin = 24 VDC @ Vin = 48 VDC @ Vin = 24 VDC @ Vin = 48 VDC Iout = 0%/100% Iout = 0%/100% Iout = 0%/100% Iout = 0%/100% PSP**-DC24-* 18 to 75 VDC 80mA max/1.3A max 60mA/0.7A max 1.92W/31.2W typical 2.88W/33.6W typical 17.2 VDC 15.7 VDC 86% Output Specifications Part Number Output Voltage Output Voltage Adj. Range Output Current (max.) Ripple/ Noise Output Voltage Regulation* Overvoltage Protection, Trigger Point Short Circuit Protection MTBF (IEC 1709 @ 25°C) PSP24-DC12-1 24 VDC 24.0 - 28.0 VDC 1 A <50mV peak to peak ±0.5 % max <42 V Current limited at 110% typical 2.5 million hours PSP05-DC24-5 5 VDC 5.0 - 5.25 VDC 5 A <6.5 V PSP12-DC24-2 12 VDC 12.0 - 15.0 VDC 2 A <24 V PSP24-DC24-1 24 VDC 24.0 - 28.0 VDC 1 A <42 V *Note: Input variation Vin min to Vin max and load variation 0 to 100% Input Output 1 Ground 1 +Vout 2 -Vin 2 -Vout 3 +Vin Dimensions and Wiring