Rimage Professional 2450 Manuals

Page 1 Copyright © 2020 Rimage Rimage® Professional 2450 Setup and Installa�on Guide 2 Prepare the Autoloader 5 6 4 3 1 Verify the Contents of the Accessory Kit Remove the Ribbon Carriers Remove the Retransfer Ribbon Packaging a. Pull up on the printer cover latch. b. Lower the printer cover to expose the ribbon carriers. Important!The 2450 is heavy. Use assistance when listing the system. a. Open the shipping boxes and remove all packing material from the outside of the autoloader. Note: You may need to bend the plastic packing in the printer tray slightly to remove it. The Accessory Kit contains: Prepare the Everest 400 Printer Note: For more detailed instructions on installing the print and retransfer ribbons, refer to our YouTube channel at Youtube.com/user/ RimageDiscPublishing for instruc�onal videos or refer to the Change the Print Ribbon procedure on on the inside of the printer cover. a. Turn the center latch counter-clockwise to unlock it. b. Pull the print ribbon carrier and the retransfer ribbon carrier to remove them from the printer. a. Remove the tape and plastic brace from the front of the carrier. b. Remove tape and plastic packaging from around the outside of the carrier. Tape and Plastic Packing Tape and Packing Foam Tape and Plastic Brace Tape and Plastic Packaging Takeup Roll Retransfer Ribbon Carrier Center Latch (Locked Position) Print Ribbon Carrier Center Latch (Unlocked Position) • Rimage�Professional�2450 Setup�and�Installation�Guide�(this document) • Rimage Professional 2450 User Guide on disc • Disc holder with Rimage Software Suite • Rimage Product Warranty/Guarantee • NEMA 5-15P power cable (North America) • CEE 7/16 power cable (Europe) • USB cable • 4 Air Filters Important! • Read all setup instructions thoroughly before you begin. • Save all packing boxes and packing materials for your Rimage system. Notes: • The 2450 and integrated EverestTM 400 printer requires an external PC to be used as the client control center, which does not ship with the 2450. Refer to the Rimage�Professional�2450 Specifications document for minimum PC requirements. • Your product may not look exactly like the product pictured. • You must have administrative privileges to install the Rimage Software Suite. • The terms "system" and "autoloader" may be used throughout this manual to refer to the 2450. The term "printer" is used to refer to the integrated Everest 400 printer. • This product is designed for an IT power distribution system with phase-to- phase voltage 120/230V. • Unless otherwise indicated, all Windows navigation statements are Windows 10 paths. Other operating system’s navigation paths may differ. Install the Retransfer Ribbon a. With the supply roll on the left side, and the takeup roll on the right side, unroll a few inches of ribbon and lay the ribbon on a clean, flat surface. b. Place the retransfer ribbon carrier on top of the exposed ribbon. c. Place the supply roll on the carrier with the large end in the hole and push down to snap the roll into place. d. Place the takeup roll on the carrier with the large end in the hole and push down to snap the roll into place. e. Return the retransfer ribbon carrier to the autoloader. Supply Roll b. Open the front door. c. d. Remove the plastic packing brace and tape near the lift arm. Remove the tape and packing foam from the input/output bins. i. Remove the tape and plastic packing from the printer tray. ii. Lower the printer door and rotate the plastic packing clockwise to remove it. Before You Begin: This document describes how to set up your Rimage Professional 2450 system to run with Rimage Software Suite version 9.4. and higher. The 2450 is part of the Rimage Professional series of disc publishing systems. The instructions in this document are intended for people who are familiar with hardware setup, software installation, and the Windows® operating system. If you do not understand the procedures in this document, ask your computer technician for help. Documents referenced in this procedure are found on the Rimage Professional 2450 User Guide disc included with your system and are also available online at rimage.com/support. Plastic Packing Brace and Tape 2004848_A

Rimage Professional™ 2450 User Guide