Roca LUMEN AVANT 811341000 Manuals

LUMEN AVANT Installation Manual PCW-1218A-EU(12010) Thank you for purchasing this product. ● Carefully read this Installation Manual to install the product correctly. ● Be sure to test operation after installation has been completed. ● Be sure to pass this Installation Manual, User’s Manual and Warranty Certificate to customers. When passing these to customers, explain the operation method. CAUTION Representing product No. 811341000 811341092 Observe Safety Precautions for Safety! These safety precautions are essential for safe installation and use of the product. Please read the precautions thoroughly before installing the product. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or damage to other property. Explanation of Hazard Symbols Checking Power Supply Follow the instructions below when performing wiring and installing the outlet. Consign wiring work to an electrician. ● Use an outlet with both a grounding terminal and grounding electrode, and suitable for 220–240 VAC with a maximum rating of 600W. (For a toilet bowl with heater, 34W is added to the maximum rating.) If the outlet is not equipped with a grounding electrode or grounding terminal, replace it with the required one. In addition, when using the toilet bowl with a heater or using this product with other electrical appliances, prepare the required number of outlets. Be sure to connect the grounding lead of the shower toilet to the grounding terminal. ● Install the outlet in a position as high above the floor as allowed by the length of the cords to avoid exposure to splashing water. The length of the power cord and grounding lead is 1.0 m. * Do not insert the power plug into the outlet until installation is completed. Failure to observe this may cause malfunction of the product. Water Pressure ● The minimum operation water pressure is 16 L per minute, and at least 0.1 MPa (1.0 kgf/cm2) when flowing. The maximum water pressure is 0.75 MPa (7.6 kgf/cm2). When using other appliances simultaneously, water pressure of at least 0.1 MPa (1.0 kgf/cm2) is required. If the minimum water pressure is less than this value, the ideal washing performance may not be obtained. Use the special device (CWA-44) to measure the water pressure. ● The above water pressure cannot be obtained if the pipes are 10A or less. Use pipes of 15A (13 mm) or more. WARNING Do not allow any anyone except an authorized service technician to disassemble, repair or modify this product. * Electric shock, fire, or injuries may result. DO NOT DISASSEMBLE Connect the grounding lead to the grounding terminal. * Not connecting this or inappropriate connection may cause electric shock or fire. * If the outlet is not equipped with a grounding terminal, consult an electrician. GROUND Do not pour water or cleanser onto the body or the power plug. * Electric shock or fire may result. DO NOT WET Do not install the product in locations subject to high humidity, such as a bathroom. * Electric shock or fire may result. DO NOT USE NEAR WATER Do not use any loose outlet or an ungrounded outlet. * Electric shock or fire may result. PROHIBITED Do not connect the product to any water source other than tap water. * The inside of the product may be corroded, causing an electric shock, fire or skin inflammation. PROHIBITED Do not remove or insert the power plug with wet hands. * Electric shock may result. NO WET HANDS ● Do not use the product with any power supply other than 220–240 VAC. ● Do not plug any other appliances into the same power outlet. * Fire may result. PROHIBITED Do not nick, damage, carve, bend unduly, pull, twist or bind the power cord, place any heavy object on it, or pinch the power cord between any objects. * The power cord may be damaged, causing electric shock or fire. PROHIBITED Firmly insert the power plug into the outlet. * Electric shock or fire may result. OBSERVE Install the product correctly according to the Installation Manual. * Electric shock, fire, or injuries may result. * Water may leak, resulting in water flooding over the floor. OBSERVE CAUTION ● When removing the strainers, be sure to close the water shutoff valve. ● When attaching the strainers, tighten these completely so that there is no clearance. * Water may leak, resulting in water flooding over the floor. OBSERVE Flush any foreign matter and rust in the pipes completely before connecting the product. * Damage inside the product may cause water leakage, resulting in water flooding over the floor. OBSERVE If freezing weather is anticipated before handing the product to the customer, drain water and leave it. * Damage from freezing may cause water leakage, resulting in water flooding over the floor. OBSERVE Be sure to adjust the water shutoff valve and check for water leakage after installation. * Water may leak, resulting in water flooding over the floor. OBSERVE Before Mounting Body Mount the toilet bowl before mounting the body. Do Not Place Body on Floor! Never place the body on the floor. Secure Water Supply Pipe! Firmly secure the water supply pipe to prevent any looseness. * Abnormal noise or water leakage may result. Minimum Installation Clearance The space required for installing the toilet is as shown in the figure below. * Secure at least 70 mm space on both the left and right of the product when viewed from the front. Be sure to connect the water supply parts to the household water supply line. Using intermediate, industrial or well water will affect the durability of electrical and mechanical parts, resulting in accidents. Water Supply Checking Parts (check inside the package) Body Decorative panel (right) Screws Bolts Installation manual Decorative panel (left) Wood screws Plastic anchors Remote control Batteries (2 pcs.) Bracket * The bracket is attached to the rear of the remote control. Slide it off to remove it. Names of Parts Toilet lid Body Top cover Toilet seat Water shut off valve Power plug (with ground fault protector) Open/close handle Water supply hose Grounding lead Toilet bowl Seat sensor Nozzle (for posterior) Nozzle (for bidet) Washer Anchor Nuts Instruction manual and other documents 1190 or more 460 400 or more 700 or more (mm) 790 70 or more Top cover * Attached to the body 70 or more The new water supply hose supplied with this product are to be used and old hose-sets should not be used. OBSERVE