RolloHomeControl HomePilot 9487 Manuals

1. These instructions... ◆ ◆...specify the installation and commissioning of the HomePilot® HD Camera (outdoor) 9487. 5. Overview of the HD Camera 9486 Item No.: 3200 43 29 VBD 658-2 (06.16) Instruction Manual for Installation and Commissioning HomePilot® HD Camera (outdoor) 9487 2. Hazard symbols The following hazard symbols are used in this manual to indicate safety instructions: Connections: 1.2 Related instructions You can find the detailed configuration of the HD Camera in the service section of our website: www.homepilot.de/manuals Enter the URL into the address field of your browser. 1.1 Application of this manual ◆ ◆Please read this manual through completely and follow all the safety instructions. ◆ ◆This manual is a component of the product. Please store it in an easily accessible place. ◆ ◆When passing the HD Camera on to a third party, this manual must be passed on as well. ◆ ◆If this manual is lost, please request a replace- ment manual. ◆ ◆Damage resulting from non-compliance with this manual and safety instructions will void the guarantee, see detailed operating instructions for configuration. We assume no liability for any consequential damage. Danger of fatal electric shock 2.1 Levels of danger and signal words CAUTION! This hazard may result in serious injury or death if not avoided. ATTENTION! This hazard may lead to property damage. 2.2 Symbols used and depictions Depiction Description 1. Steps to be taken 2. ◆ ◆ Itemisation 1) or a) Lists i further useful information 3. Glossary - Definition HomePilot® Central controller unit for RADEMACHER radio products. Control is carried out via a tablet PC or Smartphone. LAN (Local Area Network) Abbreviation for a wired, local computer network WLAN (Wireless LAN) Abbreviation for a local radio network. 4. Included in delivery 6. Functional description The HD Camera is a network-compatible camera used to monitor outside areas. It transmits image data to the HomePilot®. The HD Camera can be installed in any desired place with the enclosed wall bracket. Integrated brightness sensor For day and night monitoring with infrared LEDs and automatic image adjustment when dark. Configuration and logging on to the HomePilot® The HD Camera can be configured via a PC using the HomePilot® user interface. Network port (LAN) The HD Camera must be connected to a free LAN port on a router to be able to register and use it in the HomePilot®. WLAN Once it has been registered to the HomePilot®, it is possible to operate the HD Camera via WLAN. For this, the WLAN access data must be entered via the HD Camera's user interface. First, screw the enclosed antenna onto the HD Camera. 1) 1 x HD Camera 9487 2) 1 x WLAN antenna 3) 1 x Wall bracket Camera lens Antenna connection Antenna Wall bracket Infrared (IR) LEDs, range approx. 20 m 5) 1 x Connecting cable with electrical connectors 6) 1 x Installation set 4) 1 x Mains adaptor 1) 2) 3) 4) 5) 7. Technical Specifications Mains adaptor: Operating voltage: 230 V / 50 - 60 Hz Output voltage: 12 V / 1 A HD Camera general: Supply voltage: 12 V DC via mains adaptor Maximum current consumption: 1 A Consumption: < 4.2 W Authorised operating location: Outside areas Protection class: II Protection type: IP66 Permissible operating temperature: -20°C to + 60 °C Permissible relative humidity: 10 % to 80 % rH Dimensions (L x W x D): 166 x 62 x 65 mm 1) LAN 2) Audio input 3) Audio output 4) Power supply connection 5) Reset button