RS 193-966 Manuals

Stripping tool 1. Setting the coaxial cable stripper (for RG58/59 cable see point 3). a. Lift the screw holder (A) and swing back, see figure 2. b. Insert the cutter cassette (B) into the tool and close the screw holder, see figure 2. c. Ensure that all cutter blades are fully retracted by turning the screws anticlockwise, see figure 3. 2. Retract the pressure rollers (C) by use of the cam wheel (D), see figure 4. Push slide on the base of tool towards cassette holder, see figure 7. 3. Insert cable into the tool, making sure that the cable does not touch the cutters. Advance the pressure rollers by means of the cam wheel until the cable is just touching the 'V' of the cutter cassette, and set the maximum position of the cam wheel by means of the slide, see figure 7 by moving it backwards towards the cam wheel. The cable should be free to rotate showing no signs of friction. 4. Setting the cutting blades. Always start this operation with setting the deepest cut first, and only adjust one blade at a time by turning the screws in a clockwise direction. To test the setting of the blades, insert index finger through the opening in the cam wheel and turn the tool several times around the axis of the cable (holding the cable as shown in figure 6). Repeat this action with advanced pressure rollers (figure 5) until the optimum setting is achieved. 5. To remove the stripped cable, retract the pressure rollers by using the cam wheel, and remove the stripped pieces of insulating and braid materials from the cable and check that all cuts are of the required depth. Coaxial Cable Preparation and Termination Kit Stock No. 193-966 Figure 1. A. Cut outs for BNC cable strain reliefs in the ranges of RS stock no. 456-784 B. RG58/59 gauge C. Stripping cassette see RS stock nos. 739-562, 739-578 and 739-584 D. Containers for BNC connectors E. Containers for crimp ferrules and loose piece contents F. Wire cutter, RS stock no. 606-490 G. Crimp tool, RS stock no. 193-972 H. Stripping tool, RS stock no. 739-540 Figure 2. Figure 4. Figure 5. Figure 6. B A C D A B C D E F G H Figure 3.