Ryobi P701G Manuals

1 pdf manual(s) Ryobi P701G for free download (Document Types: Operator's manual)

Ryobi P701G Operator's manual [PDF] (2 pages)

  • Identifier: id-80035
  • Brand: Ryobi
  • Device: P701G Flashlight
  • Type: PDF
  • Key Aspects: Glossary of Technical Terms, Component Longevity Optimization, System Architecture and Design Overview
  • UPD Date: 23.06.2026
  • Source File: 333091.pdf
  • Pages: 2
  • Description: Operation and maintenance manual for the Ryobi P701G.
Pages Preview:
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BULB REPLACEMENT Replace the bulb with the same type rated 18 V, 0.6 Amp. Always ask for replacement bulb number 780287005. REMPLACEMENT DE L’AMPOULE Remplacer l’ampoule avec une ampoule du même type de 18 V, 0,6 A. Si l’ampoule doit être remplacée, demander la pièce recommandée, RÉF 780287005. REEMPLAZO DEL FOCO Reemplace el foco con uno del mismo tipo que tenga la misma capacidad nominal de 18 V, 0,6 A. Solicite siempre un foco de repuesto número 780287005. A - Always remove battery pack before changing bulb (toujours retirer la pile avant de changer l’ampoule, extraiga siempre la baterías antes de cambiar el foco) B - To remove (retrait, para desmontar) C - To remove cooled bulb: pull outward. To install new bulb: push in gently (Pour retirer l’ampoule refroidie : tirer vers l’extérieur pour installer l’ampoule neuve : pousser légèrement vers l’intérieur, Para quitar el foco enfriado: tire de él hacia fuera para instalar el nuevo foco: empújelo suavemente hacia adentro) D - To reattach (pour réinstaller, para volver a montar) The following signal words and meanings are intended to explain the levels of risk associated with the product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situa- tion, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situ- ation, which, if not avoided, may result in minor or moderate injury. NOTICE: (Without Safety Alert Symbol) Indicates important information not related to an injury hazard, such as a situation that may result in property damage. GENERAL MAINTENANCE Wipe the worklight with a clean, dry cloth periodically to remove any dust or debris. BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING WARNING: Upon removal, cover the battery pack’s terminals with heavy- duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Lithium-ion batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury. See Figures 1-3. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. WARNING: Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vi- sion loss. California Proposition 65 WARNING: This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling. Some of the following symbols may be used on this prod- uct. Please study them and learn their meaning. Proper ­interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/ EXPLANATION Safety Alert Indicates a potential per- sonal injury hazard. Read Operator’s Manual To reduce the risk of injury, user must read and understand operator’s manual before using this product. Wet Conditions Alert Do not expose battery or in- ternal flashlight components to rain or water. Hot Surface To reduce the risk of injury or damage, avoid contact with any hot surface. Recycle Symbols This product uses nickel-cadmium (Ni- Cd) and lithium-ion (Li-Ion) batteries. Local, state or federal laws may prohibit disposal of bat- teries in ordinary trash. Consult your local waste authority for information re- garding available recycling and/or disposal options. OPERATOR’S MANUAL 18 V Worklight P701G ACCEPTS ALL ONE+ BATTERY PACKS manuel d’utilisation Lampe de travail 18 v P701G COMPATIBLE AVEC TOUS LE Piles ONE+ WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. WARNING! When using electric appliances, basic precautions should always be followed, including the following: save these instructions  Read all the instructions before using the appliance.  To reduce the risk of injury, close supervision is necessary when an appliance is used near children.  To reduce the risk of electrical shock, do not put worklight or charger in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.  Use only the charger supplied by the manufacturer to recharge.  Use battery only with charger listed. For use with 18 V nickel-cadmium and 18V lithium-ion battery packs, see tool/appliance/battery pack/charger correlation supplement 987000-432.  Use only recommended battery pack. Any attempt to use another battery pack will cause damage to your worklight and could possibly explode, cause a fire, or personal injury.  Remove battery pack from worklight before replacing bulb or performing any routine maintenance or cleaning. Replace bulb with same type rated 18 V, 0.6 Amp.  Do not disassemble the worklight.  Do not place worklight or battery pack near fire or heat. They may explode. Also, do not dispose of a worn out battery pack by incinerating. Do not incinerate the battery, even if it is severely damaged or completely worn out. The battery may explode in fire.  Do not operate worklight or charger near flammable liquids or in gaseous or explosive atmospheres. Internal sparks may ignite fumes.  Do not store your worklight in a damp or wet location. Do not store in locations where the temperature is less than 50°F or more than 100°F. Do not store in outside sheds or in vehicles.  Do not permit children to use worklight, lens, and surrounding housing. It is not a toy. The temperature of the bulb will become hot after being on for only a short period of time. This hot temperature can cause burn injury if touched and can create sufficient heat to melt some fabrics.  If wrapped or in contact with fabrics, the worklight lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the worklight lens to come in contact with anything.  Keep light dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvent to clean the worklight.  Don’t expose worklight to rain. Water entering a power tool will increase the risk of electric shock or malfunction.  Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the worklight in unexpected situations. Do not use on a ladder or unstable support. worklight use and care  This product is for household use only.  Store worklight out of the reach of children and other untrained persons. Worklights are dangerous in the hands of untrained users.  Let worklight cool for several minutes after use before changing the bulb. AVERTISSEMENT ! LIRE ET VEILLER À BIEN COMPRENDRE TOUTES LE INSTRUCTIONS. Le non-respect de toutes les instructio ci-dessous peut entraîner un choc électrique, un incendie e ou des blessures graves. AVERTISSEMENT ! Au moment d’utiliser les appareils électriques, les précautio de base doivent être prises, y compris ce qui suit. Conserver ces instructions  Lire toutes les instructions avant d’utiliser l’appareil.  Pour réduire le risque de blessures, une bonne surveilla est nécessaire quand un appareil est utilisé à proximité enfants.  Pour réduire le risque d’un choc électrique, ne pas mett lampe de travail ou le chargeur dans l’eau ou autre liqu Ne pas placer ou entreposer l’appareil dans un endroit où il tomber ou être entraîné dans une baignoire ou un évier.  N’utiliser que le chargeur fournit par le fabricant p recharge.  Ne recharger le bloc-pile qu’avec l’appareil indiqué. P utiliser l’appareil avec des piles au nickel-cadmium et au lith ion de 18 V, consulter le supplément de raccordement pour o chargeur/bloc-piles/chargeur n˚ 987000-432.  N’utiliser que le bloc-pile recommandé. L’utilisation de autre le bloc-pile endommagerait la lampe de travail et pou causer une explosion, un incendie et des blessures.  Retirer le bloc de piles de la lampe de travail avant de r placer l’ampoule ou d’effectuer toute opération de nettoy ou d’entretien. Remplacer l’ampoule avec une ampoule même type de 18 V, 0,6 A.  Ne pas démonter la lampe de travail.  Ne pas placer la lampe de travail ou le bloc-pile à proxim de flammes ou d’une source de chaleur. Ils peuvent explo Également, ne pas incinérer une batterie usée. Ne pas incin la batterie, même si elle est complètement usée ou endommagée. La batterie peut exploser dans le feu.  Ne pas utiliser lampe de travail ou le chargeur à proxim de liquides explosifs, en présence de gaz ou dans atmosphère explosive. Les étincelles internes peuv enflammer les vapeurs.  Ne pas remiser la lampe de travail dans un endroit hum ou mouillé. Ne pas remiser dans des emplacements o température est inférieure 10 °C (50 °F) à ou supérieu 38 °C (100 °F). Ne pas remiser dans un remise extérieure dans un véhicule.  Ne pas laisser des enfants utiliser la lampe de travail s surveillance. Ce n’est pas un jouet. L’ampoule devient brûl peu de temps après avoir été allumée. Elle peut causer brûlures et dégage assez de chaleur pour fondre certains tis  Si la lampe de travail est enveloppée ou en contact ave tissu, le diffuseur peut dégager une chaleur suffisante p fondre certains tissus. Pour éviter des blessures graves jamais laisser le diffuseur de la lampe entrer en contact a quoi que ce soit.  Garder la lampe de travail sèche, propre et exempte d’huil de graisse. Toujours utiliser un chiffon propre pour le nettoy Ne jamais utiliser de liquide de freins, d’essence, de produ base de pétrole ou de solvants puissants pour nettoyer la lam  Ne pas exposer la lampe de travail à la pluie. La pénétra d’eau dans des outils électriques accroît le risque de c électrique ou de problèmes de fonctionnement.  Ne pas travailler hors de portée. Toujours se tenir bien cam et en équilibre. Une bonne tenue et un bon équilibre permet de mieux contrôler la lampe en cas de situation imprévue pas utiliser la lampe sur une échelle ou un support instable SYMBOLS OPERATION WARRANTY IMPORTANT SAFETY INSTRUCTIONS INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ IMPORTANT SAFETY INSTRUCTIONS maintenance Fig. 1  Do not use or permit use of worklight in bed or sleeping bags. This worklight lens can melt fabric and a burn injury could result. SAFETY RULES FOR Worklight  Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets in your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention.  Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.  Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately. Failure to heed this warning can result in serious personal injury. n Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. Français A B ALIGN RAISED RIB ON BATTERY PACK WITH GROOVE IN BATTERY PORT / ALIGNER LA NERVURE DU DE LA pile AVEC CELLE DE L’ORIFICE DE LA pile / ALINEE LA COSTILLA REALZADA DE LA Baterías CON LA RANURA DE SU RECEPTÁCULO A - Battery pack (bloc-piles, paquete de baterías) B - Depress both latches to release (appuyer sur les deux verrous pour libérer, oprima ambas presillas para soltarlo) B A B Fig. 2 A - 295° rotating head (tête rotative sur 295°, cabeza giratoria de 295º) B - On/off switch (interrupteur marche/arrêt, interruptor de encendido/apagado ) SYMBOLS V Volt Voltage min Minutes Time Direct Current Type or a characteristic of current OPERATION A D B Fig. 3 This product has a Three-year Limited Warranty and 90 Day Exchange Policy. For Warranty details go to www.ryobitools.com 990000 6-22-12 (REV A