Ryobi RY31093 Manuals

11 in. Surface Cleaner Attachment RY31093 WARNING: To reduce the risk of injury, user must read and understand the operator’s manual for their pressure washer before us­ ing this accessory. To reduce the risk of injury or property damage, spray the pressure stream in a safe direction to ensure proper connection of all accessories before starting any cleaning project. Only use on pressure washers oper­ ating at up to 2,000 psi with a maximum flow rate of 1.4 gpm. Ensure compatibility and proper fit before using this ­accessory. Wear eye protection with side shields marked to comply with ANSI Z87.1. Risk of fluid injections; do not point at people, pets, electrical devices or the unit itself. Turn off the pressure washer, relieve the water pres­sure in the trig­ ger handle, and lock the lock out on the trigger handle (if one is included with your pressure washer) before installing, changing, or adjusting accessories. For cold water use only. Save these instructions. Refer to them frequently and use them to instruct other users. If you loan someone this tool, loan them these instructions also. PRODUCT SPECIFICATIONS Connections...................................1/4 in. Quick Connect Plug Deck Width....................................................................... 11 in. Maximum Pressure............................................up to 2,000 psi Maximum Water Flow...................................................1.4 gpm Maximum Inlet Water Temperature..................................104°F INSTALLING THE SURFACE CLEANER ON THE SPRAY WAND See Figure 1. n Pull back the quick-connect collar on the pressure washer spray wand. n Insert the surface cleaner inlet plug into the spray wand quick connect coupler. n Push the collar forward so that the surface cleaner inlet plug is secured properly. Check to see that the connection is secure. WARNING: To reduce the risk of injection or injury, only use the surface cleaner on flat, horizontal surfaces. Never lift the surface cleaner from the cleaning surface while operating the pres­ sure washer. Fig. 1 INLET PLUG Fig. 2 QUICK CONNECT COUPLER USING THE SURFACE CLEANER See Figure 2. WARNING: Do not reach hands or feet under cleaning deck. Contact with the spinning nozzles or spray bar can result in a fluid injection or other serious personal injury.