Samsung CS29K10 Manuals

COLOUR TELEVISION 25A6 29A5/29A6/29A7/29K3/29K5/29M6/29U2 34A7 Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ENG REMOTE CONTROL ON-SCREEN MENUS TELETEXT FUNCTION (OPTION) ELECT

English - 1 AA68-03627A-00 ➢ The actual configuration of your TV may be different, depending on your model. Connection Panel (depending on the model) cable television network Rear Panel ☛ Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the Œ (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Input/Output The SCART´ and SCARTˇ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART´ is also used for equipment with an RGB output, such as a video game device or video disc player. continued... or Œ Audio input ´ Video input ˇ S-Video input ¨ Headphone jack Front (or Side) Panel ☛ Please be sure to match the color coded input terminals and cable jacks. Connecting to the RCA Input The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device. Connecting to the S-VIDEO Input The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Connecting Headphones The ¨ (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. ➢ When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority. Connecting to the RCA Input The RCA¨ and RCAˆ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA∏ connectors are used for equipment such as a DVD with component output (480i only). Connecting to the RCA Output The RCAØ connectors are used for equipment, such as a recording VCR or audio system. ➢ The actual configuration of your TV may be different, depending on your model. Control Panel (depending on the model) ◆ You can use the ¨ buttons to switch the TV on when it is in standby mode depending on the model. ◆ The ˇ and ¨ buttons also have the same function as the œ/√/…/† buttons on the remote control. ◆ If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television. Front (or Side) Panel Œ Input source selection ´ On-screen menu display ˇ Volume adjustment ¨ Channel selection ˆ Standby indicator Ø Remote control sensor ∏ Power on/off COLOR TELEVISION CS21A11/CS21E20/CS21E21/CS21E22/ CS21M7/CS21S8/CS21T10/CS21T20/ CS25A6/CS25A11/CS25E20/CS25K10/ CS25M6/CS25M20/ CS29A7/CS29A11/CS29K3/CS29K5/ CS29K10/CS29M6/CS29M16/CS29M20 Owner’s Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www.samsung.com/global/register AA68-03627A-00Eng_mind_pip 5/21/05 4:08 PM Page 1

English - 1 AA68-03628A-00 ➢ The actual configuration of your TV may be different, depending on your model. Control Panel (depending on the model) ◆ You can use the ¨ buttons to switch the TV on when it is in standby mode depending on the model. ◆ The ˇ and ¨ buttons also have the same function as the œ/√/…/† buttons on the remote control. ◆ If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television. Front (or Side) Panel Œ Input source selection ´ On-screen menu display ˇ Volume adjustment ¨ Channel selection ˆ Standby indicator Ø Remote control sensor ∏ Power on/off ➢ The actual configuration of your TV may be different, depending on your model. Connection Panel (depending on the model) cable television network Rear Panel ☛ Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the Œ (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Input/Output The SCART´ and SCARTˇ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART´ is also used for equipment with an RGB output, such as a video game device or video disc player. continued... or Œ Audio input ´ Video input ˇ S-Video input ¨ Headphone jack Front (or Side) Panel ☛ Please be sure to match the color coded input terminals and cable jacks. Connecting to the RCA Input The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device. Connecting to the S-VIDEO Input The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Connecting Headphones The ¨ (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. ➢ When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority. COLOR TELEVISION CS21A11/CS21M7/CS21M20/CS21S8/ CS21T10/CS21T20/ CS25A6/CS25A11/CS25K10/CS25M6/ CS25M20/ CS29A7/CS29A11/CS29K3/CS29K5/ CS29K10/CS29M6/CS29M16/CS29M20 Owner’s Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www.samsung.com/global/register Connecting to the RCA Input The RCA¨ and RCAˆ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA∏ connectors are used for equipment such as a DVD with component output (480i only). Connecting to the RCA Output The RCAØ connectors are used for equipment, such as a recording VCR or audio system. AA68-03628A-X1Eng_0413 4/13/05 9:22 PM Page 1

English - 1 AA68-03627A-02 ➢The actual configuration of your TV may be different, depending on your model. Connection Panel (depending on the model) cable television network Rear Panel ☛Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the Œ (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Input/Output The SCART´ and SCARTˇ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART´ is also used for equipment with an RGB output, such as a video game device or video disc player. continued... or Œ Audio input ´ Video input ˇ S-Video input ¨ Headphone jack Front (or Side) Panel ☛Please be sure to match the color coded input terminals and cable jacks. Connecting to the RCA Input The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device. Connecting to the S-VIDEO Input The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Connecting Headphones The ¨ (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. ➢When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority. Connecting to the RCA Input The RCA¨ and RCAˆ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA∏connectors are used for equipment such as a DVD with component output (480i only). Connecting to the RCA Output The RCAØ connectors are used for equipment, such as a recording VCR or audio system. ➢The actual configuration of your TV may be different, depending on your model. Control Panel (depending on the model) ◆You can use the ¨ buttons to switch the TV on when it is in standby mode depending on the model. ◆The ˇ and ¨ buttons also have the same function as the œ/√/†/… buttons on the remote control. ◆If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television. Front (or Side) Panel Œ Input source selection ´ On-screen menu display ˇ Volume adjustment ¨ Channel selection ˆ Standby indicator Ø Remote control sensor ∏Power on/off COLOR TELEVISION CS21A11/CS21E20/CS21E21/CS21E22/ CS21M7/CS21M21/CS21S8/CS21T10/ CS21T20/ CS25A6/CS25A11/CS25E20/CS25K10/ CS25M6/CS25M20/ CS29A7/CS29A11/CS29K3/CS29K5/ CS29K10/CS29M6/CS29M16/CS29M20 Owner’s Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www.samsung.com/global/register AA68-03627A-02Eng_mind_pip 8/16/06 4:27 PM Page 1

English - 1 AA68-03628A-00 ➢The actual configuration of your TV may be different, depending on your model. Control Panel (depending on the model) ◆You can use the ¨ buttons to switch the TV on when it is in standby mode depending on the model. ◆The ˇ and ¨ buttons also have the same function as the œ/√/…/† buttons on the remote control. ◆If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television. Front (or Side) Panel Œ Input source selection ´ On-screen menu display ˇ Volume adjustment ¨ Channel selection ˆ Standby indicator Ø Remote control sensor ∏Power on/off ➢The actual configuration of your TV may be different, depending on your model. Connection Panel (depending on the model) cable television network Rear Panel ☛Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the Œ (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Input/Output The SCART´ and SCARTˇ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART´ is also used for equipment with an RGB output, such as a video game device or video disc player. continued... or Œ Audio input ´ Video input ˇ S-Video input ¨ Headphone jack Front (or Side) Panel ☛Please be sure to match the color coded input terminals and cable jacks. Connecting to the RCA Input The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device. Connecting to the S-VIDEO Input The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Connecting Headphones The ¨ (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. ➢When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority. COLOR TELEVISION CS21A11/CS21M7/CS21M20/CS21S8/ CS21T10/CS21T20/ CS25A6/CS25A11/CS25K10/CS25M6/ CS25M20/ CS29A7/CS29A11/CS29K3/CS29K5/ CS29K10/CS29M6/CS29M16/CS29M20 Owner’s Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www.samsung.com/global/register Connecting to the RCA Input The RCA¨ and RCAˆ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA∏connectors are used for equipment such as a DVD with component output (480i only). Connecting to the RCA Output The RCAØ connectors are used for equipment, such as a recording VCR or audio system. AA68-03628A-X1Eng_0413 4/13/05 9:22 PM Page 1

English - 1 AA68-03627A-00 ➢The actual configuration of your TV may be different, depending on your model. Connection Panel (depending on the model) cable television network Rear Panel ☛Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the Œ (75 Ω coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Input/Output The SCART´ and SCARTˇ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART´ is also used for equipment with an RGB output, such as a video game device or video disc player. continued... or Œ Audio input ´ Video input ˇ S-Video input ¨ Headphone jack Front (or Side) Panel ☛Please be sure to match the color coded input terminals and cable jacks. Connecting to the RCA Input The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device. Connecting to the S-VIDEO Input The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Connecting Headphones The ¨ (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. ➢When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority. Connecting to the RCA Input The RCA¨ and RCAˆ connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.) The RCA∏connectors are used for equipment such as a DVD with component output (480i only). Connecting to the RCA Output The RCAØ connectors are used for equipment, such as a recording VCR or audio system. ➢The actual configuration of your TV may be different, depending on your model. Control Panel (depending on the model) ◆You can use the ¨ buttons to switch the TV on when it is in standby mode depending on the model. ◆The ˇ and ¨ buttons also have the same function as the œ/√/…/† buttons on the remote control. ◆If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television. Front (or Side) Panel Œ Input source selection ´ On-screen menu display ˇ Volume adjustment ¨ Channel selection ˆ Standby indicator Ø Remote control sensor ∏Power on/off COLOR TELEVISION CS21A11/CS21E20/CS21E21/CS21E22/ CS21M7/CS21S8/CS21T10/CS21T20/ CS25A6/CS25A11/CS25E20/CS25K10/ CS25M6/CS25M20/ CS29A7/CS29A11/CS29K3/CS29K5/ CS29K10/CS29M6/CS29M16/CS29M20 Owner’s Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www.samsung.com/global/register AA68-03627A-00Eng_mind_pip 5/21/05 4:08 PM Page 1

ENG COLOUR TELEVISION Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS TELETEXT FUNCTION KS3a_Eng_Wide.qxd 10/19/2002 1:03 PM Page 1

COLOUR TELEVISION CS29M6/CS29M20/CS29M16/ CS29K3/CS29K5/CS29K10/ CS29A11/CS25M6/CS25M20/ CS25K10/CS25A11/CS21T10/ CS21T20/CS21A11/CS21M7/ CS21M20/CS21S8 Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE DNIe Jr (Digital Natural Image engine Junior) TELETEXT (OPTION)