Samsung QB98R Manuals

Quick Setup Guide QB98R English * The colour and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance. * Download the user manual from the website for further details. http://www.samsung.com/displaysolutions -00 Parts Ports Troubleshooting Guide Checking the Components English Contact the vendor where you purchased the product if any components are missing. Components may differ in different locations. • Quick Setup Guide • Warranty card (Not available in some locations) • Regulatory guide • Power cord • Batteries (AAA x 2) (Not available in some locations) • Remote Control • RS232C(IN) adapter • HOLDER-CABLE English Issues Solutions The screen keeps switching on and off. Check that the cable between the product and the PC is connected correctly. Not Optimum Mode is displayed. This message is displayed when a signal from the graphics card exceeds the product’s maximum resolution and frequency. Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product specifications. There is no image on the screen and the power indicator blinks every 0.5 to 1 second. The display is turned off to save energy. Press any key on the keyboard or move the mouse to return to the previous screen. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. English 1 Spacer logo: Do not pull on the spacer logo using force. The logo may tear or break off. 2 Remote sensor: Press a button on the remote control pointing at the bottom of the product face to perform the function. The remote control sensor is located on the bottom of the product. * Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. 3 Power button English 1 Connects to MDC using a LAN cable. (10/100 Mbps) 2 Connect to a USB memory device. * The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work. 3 DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable. MAGICINFO IN: Connects to a network box using DP-DVI cable to use Magicinfo. 4 Connects to MDC using an RS232C adapter. 5 Connects to MDC using an RS232C adapter. 6 Receives sound from a source device via an audio cable. 7 Connects to a source device using a HDMI cable or HDMI-DVI cable. 8 Connects to a source device using a HDMI cable or HDMI-DVI cable. Connects to another product using a HDMI cable. 9 Connects to a PC using a DP cable. 0 0 Connects to another product using a HDMI cable. ! ! Connect to a USB memory device. * The USB ports on the product accept a maximum constant current of 0.5A. If the maximum value is exceeded, USB ports may not work. @ @ Outputs sound to an audio device via an audio cable. # # Connects to an external IR cable that receives signals from the remote control. Speaker רמקול חלקים יציאות המדריך לפתרון בעיות בדיקת הרכיבים מדריך התקנה מהיר עברית * הצבע והמראה עשויים להשתנות בהתאם למוצר, והתוכן במדריך כפוף לשינוי ללא הודעה מוקדמת לצורך שיפור הביצועים. * לפרטים נוספים, הורד את המדריך למשתמש מאתר האינטרנט. עברית אם חסר לך רכיב כלשהו, פנה אל הספק שרכשת ממנו את המוצר. במקומות מסוימים הרכיבים עשויים להיות שונים. • מדריך התקנה מהיר • כרטיס אחריות (לא זמינות במקומות מסוימים) • מדריך תקינה • כבל חשמל • ) ‏(לא זמינות במקומות מסוימים)AAA x 2( סוללות • שלט רחוק •RS232C(IN)‎ מתאם • כבל-מחזיק עברית בעיות פתרונות המסך נדלק וכבה לסירוגין. ודא שהכבל בין המוצר והמחשב מחובר כראוי. לא מצב אופטימלי מוצג במסך. הודעה זו מוצגת כאשר האותות המגיעים מהכרטיס הגרפי חורגים מהרזולוציה ומתדירות הרענון המרביים של המוצר. עיין בטבלה ‘מצב אותות רגיל’ והגדר רזולוציה ותדירות רענון מרביות על פי מפרט המוצר. אין תמונה במסך ומחוון ההפעלה/כיבוי מהבהב אחת לחצי שנייה או שנייה. התצוגה תבצע כיבוי כדי לחסוך בצריכת אנרגיה. לחץ על אחת ממקשי המקלדת או הזז את העכבר כדי לחזור למסך הקודם. עברית 1 1 .לוגו החברה: אין למשוך את לוגו החברה תוך הפעלת כוח. הלוגו עלול להיקרע או להישבר 2 2 חיישן השלט רחוק: כדי לבצע פעולה, לחץ על לחצן השלט רחוק תוך הפניית השלט אל החיישן שבתחתית חזית המוצר. חיישן השלט רחוק נמצא בתחתית המוצר. * הפעלת התקני תצוגה אחרים בחלל שבו נמצא השלט רחוק של המוצר עלולה לאפשר שליטה גם בהתקני התצוגה האחרים באמצעות השלט רחוק. 3 3לחצן הפעלה עברית 1 1 )‎10/100 Mbps(‏ .LAN בעזרת כבלMDC חיבור 2 2 .USB חיבור התקן זיכרון * אמפר.1.0 במוצר מקבלות זרם קבוע מרבי שלUSB-יציאות ה לא יפעלו.USB-אם תהיה חריגה מהערך המרבי, ייתכן שיציאות ה 3 3 .HDMI-DVI או כבלDVI : לחיבור התקן מקור בעזרת כבלDVI IN .Magicinfo- כדי להשתמש בDP-DVI : חיבור לתיבת רשת באמצעות כבלMAGICINFO IN 4 4 .RS232C בעזרת מתאםMDC חיבור 5 5 .RS232C בעזרת מתאםMDC חיבור 6 6 .קבלת צליל מהתקן מקור באמצעות כבל שמע 7 7 .HDMI-DVI או כבלHDMI לחיבור התקן מקור בעזרת כבל 8 8 .HDMI-DVI או כבלHDMI לחיבור התקן מקור בעזרת כבל .HDMI חיבור מוצר אחר בעזרת כבל 9 9 .DP חיבור מחשב בעזרת כבל 0 0 .HDMI חיבור מוצר אחר בעזרת כבל ! ! .USB חיבור התקן זיכרון * אמפר.0.5 במוצר מקבלות זרם קבוע מרבי שלUSB-יציאות ה לא יפעלו.USB-אם תהיה חריגה מהערך המרבי, ייתכן שיציאות ה @ @ הוצאת צליל להתקן שמע באמצעות כבל שמע. # # . חיצוני שמקבל אותות מהשלט רחוקIR חיבור לכבל Web site: http://www.samsung.com ISRAEL *6963 Contact SAMSUNG WORLD WIDE צור קשר עם סמסונג English Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product has included important literature concerning operation and maintenance. ꞏꞏIf your equipment uses an AC adapter: ‐‐ Only use the AC adapter with your product by Samsung. ‐‐ Do not use the power cord with other products. ꞏꞏDo not install this equipment in a confined space such as a case or similar. ꞏꞏThe slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. The slots and openings must never be blocked or covered. ꞏꞏThe product should be located away from heat sources such as radiators, heat registers, or other products that produce heat. ꞏꞏDo not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock. (Apparatus shall not be exposed to dripping or splashing) ꞏꞏThe apparatus must be connected to an earthed MAINS socket-outlet (Class l Equipment only). Or Use only a properly grounded plug and receptacle (Class l Equipment only). ꞏꞏTo disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. ꞏꞏAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by POWER. Warning! Important Safety Instructions אזהרה! הוראות בטיחות חשובות עברית שברשותך לפני שתנסה להתקין את המוצר.Samsung קרא את הסעיף המתאים שמתייחס לסימון על מוצר זהירות סכנת התחשמלות, לא לפתוח זהירות: כדי לצמצם את סכנת ההתחשמלות, אין להסיר את הכיסוי (או את גב המוצר). המוצר לא מכיל ידי המשתמש. יש למסור את המוצר לטכנאי מוסמך לביצוע תיקונים.-חלקים הניתנים לתיקון על סמל זה מציין מתח גבוה שקיים בתוך ההתקן. מסוכן לבוא במגע כלשהו עם כל רכיב פנימי של המוצר. .סמל זה מציין תיעוד חשוב בנושא תפעול ותחזוקה שצורף למוצר זה ꞏ ꞏ :AC אם הציוד עושה שימוש במתאם ‐‐ .Samsung שצורף למוצר על ידיAC-השתמש רק במתאם ה ‐‐ אל תשתמש בכבל החשמל המצורף עם מוצרים אחרים. ꞏ ꞏ .מה דומה-אל תתקין ציוד זה בחלל מוגבל כגון מארז או דבר ꞏ ꞏ החריצים והפתחים בארונית ובגב או בתחתית קיימים לצורך אוורור הכרחי. יש להקפיד שהחריצים והפתחים לעולם לא יהיו חסומים או מכוסים. ꞏ ꞏ יש למקם את המוצר הרחק ממקורות חום, כגון רדיאטורים, פתחי אוורור של מזגנים או מוצרים אחרים הפולטים חום. ꞏ ꞏ אין למקם כלי המכיל מים (אגרטל וכדו’) על גבי מכשיר זה, מכיוון שהדבר מהווה סיכון לשריפה או להתחשמלות. (אין לחשוף את המכשיר לטפטוף או להתזה) ꞏ ꞏ בלבד). לחלופין, השתמש אך ורקClass I תקע מוארק (ציוד מסוג-יש לחבר את המכשיר לחיבור שקע בלבד).Class I תקע המוארקים כראוי (ציוד מסוג-בשקע ובית ꞏ ꞏ תקע, וכך-תקע, יש למשוך את התקע אל מחוץ לחיבור השקע-כדי לנתק את המכשיר מחיבור השקע התקע יהיה ניתן להפעלה. ꞏ ꞏ גם אם כיביתAC-כל זמן שיחידה זו מחוברת לשקע החשמל בקיר, היא אינה מנותקת ממקור מתח ה יחידה זו באמצעות לחצן ההפעלה. English Specifications Model Name QB98R Panel Size 98 CLASS (97.5 inches / 247.7 cm) Display area 2158.848 mm (H) x 1214.352 mm (V) Power Supply AC100-240V~ 50/60Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Environmental considerations Operating Temperature: 0 °C – 40 °C (32 °F – 104 °F) Humidity: 10% – 80%, non-condensing Storage Temperature: -20 °C – 45 °C (-4 °F – 113 °F) Humidity: 5% – 95%, non-condensing * This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. * For detailed device specifications, visit the Samsung Electronics website. Connecting to a PC DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT Connecting to a Video Device DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/HDMI AUDIO IN Connecting and Using a Source Device RS232C IN RJ45 RS232C OUT RJ45 RS232C IN RS232C OUT HUB RS232C IN RJ45 RS232C OUT RJ45 RS232C IN RS232C OUT HUB RS232C IN RJ45 RS232C OUT RJ45 RS232C IN RS232C OUT HUB English For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme is available on the website. http://www.samsung.com/displaysolutions Connecting to MDC Connecting to an Audio System DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT Connecting the LAN Cable RJ45 English Use Cat7(*STP Type) cable for the connection. (10/100 Mbps) *Shielded Twist Pair חיבור למחשב MDC-חיבור ל חיבור התקן מקור והפעלתו עברית , עיין בעזרה לאחר התקנת התוכנית. MDC לפרטים על אופן השימוש בתוכנית זמינה באתר האינטרנט.MDC תוכנית חיבור להתקן וידאו חיבור למערכת שמע LAN-חיבור כבל ה עברית )10/100 Mbps( . עבור החיבורCat7(*STP Type)‎ השתמש בכבל עברית מפרט שם דגםQB98R לוח גודל ס"מ)247.7 / ' אינץ97.5( 98 סיווג שטח תצוגה )V( מ"מ1214.352‏ x‏ )H( מ"מ2158.848 אספקת כוחAC100-240V~ 50/60Hz .עיין במדבקה שעל גב המוצר, שכן המתח התקני שונה בכל מדינה שיקולי סביבה תפעול ‎0 °C – 40 °C ‎(32 °F – 104 °F)‎ :טמפרטורה ‎, ללא עיבוי10% – 80%‎ :לחות אחסון ‎-20 °C – 45 °C‎ (-4 °F – 113 °F)‎ :טמפרטורה ‎, ללא עיבוי5% – 95%‎ :לחות * . בסביבה ביתית, מוצר זה עלול לגרום להפרעות בתדר רדיו, ובמקרה כזה ייתכן שיהיה על המשתמש לנקוט צעדים מתאימים.Class A זה מוצר בסיווג * .Samsung Electronics למפרט מכשיר מפורט, בקר באתר האינטרנט של

© Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than Samsung are property of their respective owners. QBR (QB43R QB49R QB55R QB65R QB75R QB98R) QER (QE82R) QMR (QM32R QM43R QM49R QM55R QM65R QM75R) QMR-T (QM32R-T QM43R-T QM55R-T) The colour and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance. Recommended hours of use per day for the QBR models (except for QB98R), QM32R, and QER models is less than 16 hours. If the product is used for longer than 16 hours a day, the warranty may be void. An administration fee may be charged in the following situations: (a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual has not been read). (b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user manual has not been read). You will be informed of the administration fee amount before a technician visits. Smart Signage User Manual (By Model) This manual provides information about your Smart Signage including supported types and product specifications per model. Table of contents Preparations Checking the Components 3 Parts 4 QM32R/Q*43R/Q*49R/Q*55R/Q*65R/ Q*75R/QE82R/QM32R-T/QM43R-T/ QM55R-T 4 QB98R 5 Anti-theft Lock 6 Ports 7 Q*43R/Q*49R/Q*55R/Q*65R/Q*75R/ QE82R 7 QM32R 8 QB98R 9 QM32R-T 10 QM43R-T/QM55R-T 11 Control menu 12 Administrator menu (Supported models: QMR-T) 13 Precautions when handling the panel 14 Before Installing the Product (Installation Guide) 15 Tilting Angle and Rotation 15 Ventilation 15 Installing the Wall Mount 16 Preparing before installing Wall-Mount 16 Installing the Wall Mount 16 Wall Mount Kit Specifications (VESA) 17 2 Specifications General 22 Preset Timing Modes 24 Appendix Licence 25 Using a touchscreen monitor (Supported models: QMR-T) Touchscreen monitor 18 Read below before using the product 18 Connecting the touch overlay 18 Connecting the touchscreen monitor 19 Connecting to a PC 19 Connecting to a laptop or tablet PC 19 Configuring the touchscreen monitor settings 20 Calibration 20 3 Preparations Chapter 01 " " Contact the vendor where you purchased the product if any components are missing. " " The appearance of the components may differ from the images shown. " " A stand is not provided with the product. To install a stand, you can purchase one separately. " " The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable. Checking the Components Quick Setup Guide Warranty card (Not available in some locations) Regulatory guide Power cord Batteries (AAA x 2) (Not available in some locations) Remote Control RS232C adapter HOLDER-CABLE (Supported models: Q*65R, Q*75R, QB98R, QE82R) Holder-Ring x 4 (Supported models: Q*43R, Q*49R, Q*55R, Q*65R, Q*75R, QM43R-T, QM55R-T) TOUCH OUT cable x 2 (Supported models: QMR-T)

Quick Setup Guide QB98R * The colour and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance. * Download the user manual from the website for further details. http://www.samsung.com/displaysolutions BN68-09716D-00 1 Connects to MDC using a LAN cable. (10/100 Mbps) 2 Connect to a USB memory device. * The USB ports on the product accept a maximum constant current of 1.0A. If the maximum value is exceeded, USB ports may not work. 3 DVI IN: Connects to a source device using a DVI cable or HDMI- DVI cable. MAGICINFO IN: Connects to a network box using DP-DVI cable to use Magicinfo. 4 Connects to MDC using an RS232C adapter. 5 Connects to MDC using an RS232C adapter. 6 Receives sound from a source device via an audio cable. 7 Connects to a source device using a HDMI cable or HDMI-DVI cable. 8 Connects to a source device using a HDMI cable or HDMI-DVI cable. Connects to another product using a HDMI cable. 9 Connects to a PC using a DP cable. 0 0 Connects to another product using a HDMI cable. ! ! Connect to a USB memory device. * The USB ports on the product accept a maximum constant current of 0.5A. If the maximum value is exceeded, USB ports may not work. @ @ Outputs sound to an audio device via an audio cable. # # Connects to an external IR cable that receives signals from the remote control. Checking the Components Ports Issues Solutions The screen keeps switching on and off. Check that the cable between the product and the PC is connected correctly. No Signal is displayed on the screen. Check that the product is connected correctly with a cable. Check that the source device connected to the product is powered on. Depending on the type of external device, the screen may not display properly. In this case, connect it with the HDMI Hot Plug function turned On. Not Optimum Mode is displayed. This message is displayed when a signal from the graphics card exceeds the product’s maximum resolution and frequency. Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product specifications. The images on the screen look distorted. Check the cable connection to the product. The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product. Then, change the screen settings if required by referring to ‘Preset Timing Modes’. There are shadows or ghost images left on the screen. Troubleshooting Guide Contact the vendor where you purchased the product if any components are missing. The pictures may look different from the actual components. Quick Setup Guide Warranty card (Not available in some locations) Power cord Batteries (AAA x 2) (Not available in some locations) Remote Control RS232C(IN) adapter HOLDER-CABLE Parts The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 1 Spacer logo Do not pull on the spacer logo using force. The logo may tear or break off. 2 Remote sensor Press a button on the remote control pointing at the bottom of the product face to perform the function. The remote control sensor is located on the bottom of the product. * Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. 3 Power button Speaker 1 2 3 4 5 6 8 7 9 0 ! @ # Model Name QB98R Panel Size 247.7 cm Display area 2158.848 mm (H) x 1214.352 mm (V) Power Supply AC100-240V~ 50/60Hz Refer to the label at the back of the product as the standard voltage can vary in different countries. Environmental considerations Operating Temperature: 0 °C – 40 °C (32 °F – 104 °F) Humidity: 10% – 80%, non-condensing Storage Temperature: -20 °C – 45 °C (-4 °F – 113 °F) Humidity: 5% – 95%, non-condensing * This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. * For detailed device specifications, visit the Samsung Electronics website. * The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung. - Accessory cables: signal cables and power cords Warning! Important Safety Instructions If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free) / 1800 5 SAMSUNG (1800 5 7267864) (Toll-Free) www.samsung.com/in/support Contact SAMSUNG WORLD WIDE Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product has included important literature concerning operation and maintenance. This product is RoHS compliant. This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. For more information on safe disposal and recycling visit our website www.samsung.com/in or contact our Helpline numbers - 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free) / 1800 5 SAMSUNG (1800 5 7267864) (Toll-Free) ꞏꞏIf your equipment uses an AC adapter: ‐‐Only use the AC adapter with your product by Samsung. ‐‐Do not use the power cord with other products. ꞏꞏDo not install this equipment in a confined space such as a case or similar. ꞏꞏThe slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. The slots and openings must never be blocked or covered. ꞏꞏThe product should be located away from heat sources such as radiators, heat registers, or other products that produce heat. ꞏꞏDo not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric shock. (Apparatus shall not be exposed to dripping or splashing) ꞏꞏThe apparatus must be connected to an earthed MAINS socket- outlet (Class l Equipment only). Or Use only a properly grounded plug and receptacle (Class l Equipment only). ꞏꞏTo disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. ꞏꞏAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by POWER. Connecting to a PC DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT Connecting to MDC For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme is available on the website. http://www.samsung.com/displaysolutions RS232C IN RJ45 HUB RS232C OUT RJ45 RS232C IN RS232C OUT RS232C IN RJ45 HUB RS232C OUT RJ45 RS232C IN RS232C OUT RS232C IN RJ45 HUB RS232C OUT RJ45 RS232C IN RS232C OUT Connecting to a Video Device DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/HDMI AUDIO IN DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/HDMI AUDIO IN Connecting the LAN Cable Use Cat7(*STP Type) cable for the connection. (10/100 Mbps) *Shielded Twist Pair DVI/MAGICINFO IN DVI/HDMI/AUDIO IN AUDIO OUT RJ45 Connecting to an Audio System DP IN (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN 1 (ARC), HDMI IN 2 (DAISY CHAIN IN) HDMI IN DVI/HDMI AUDIO IN DVI/MAGICINFO IN DVI/HDMI AUDIO IN AUDIO OUT Connecting and Using a Source Device Specifications

© Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Trademarks other than Samsung Electronics are property of their respective owners. QBR (QB43R QB49R QB55R QB65R QB75R QB98R) QBR-N (QB55R-N QB65R-N QB75R-N) QER (QE82R) QMR (QM32R QM43R QM49R QM55R QM65R QM75R) The color and the appearance may differ depending on the product, and the content in the manual is subject to change without prior notice to improve the performance. Recommended hours of use per day for the QBR*(except for QB98R), QM32R, and QER models is less than 16 hours. If the product is used for longer than 16 hours a day, the warranty may be void. Smart Signage User Manual (By Model) This manual provides information about your Smart Signage including supported types and product specifications per model. Table of contents Preparations Checking the Components 3 Parts 4 QM32R/Q*43R/Q*49R/Q*55R*/Q*65R*/ Q*75R*/QE82R 4 QB98R 5 Anti-theft Lock 6 Ports 7 Q*43R/Q*49R/Q*55R*/Q*65R*/Q*75R*/ QE82R 7 QM32R 8 QB98R 9 Control menu 10 Precautions when handling the panel 11 Before Installing the Product (Installation Guide) 12 Tilting Angle and Rotation 12 Ventilation 12 Installing the Wall Mount 13 Preparing before installing Wall-Mount 13 Installing the Wall Mount 13 Wall Mount Kit Specifications (VESA) 14 Specifications General 15 Preset Timing Modes 17 Appendix License 18 2 3 Preparations Chapter 01 " " Contact the vendor where you purchased the product if any components are missing. " " The appearance of the components may differ from the images shown. " " A stand is not provided with the product. To install a stand, you can purchase one separately. " " The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable. Checking the Components Quick Setup Guide Warranty card (Not available in some locations) Regulatory guide Power cord Batteries (AAA x 2) (Not available in some locations) Remote Control RS232C(IN) adapter HOLDER-CABLE (Supported models: Q*65R*, Q*75R*, QB98R, QE82R) Holder-Ring x 4 (Supported models: Q*43R, Q*49R, Q*55R*, Q*65R*, Q*75R*)