Santak 3C3 EX 30KS Manuals

www.electway.net Thanks for choosing Santak products! All warnings and operation instructions in the manual and on the machine should be strictly followed�and this user manual should be kept properly for future reference. Do not attempt to operate the UPS until reading through all safety information and operating instructions of this manual carefully. This manual applies to the Castle EX series products, including: 3C3 EX 20KS/3C3 EX 20KS-ISO 3C3 EX 30KS/3C3 EX 30KS-ISO 3C3 EX 40KS/3C3 EX 40KS-ISO 3C3 EX 60KS/3C3 EX 60KS-ISO 3C3 EX 80KS/3C3 EX 80KS-ISO Solemn Statement Supervision Code Statement To ensure consumer rights and safe electricity application, help you purchase authentic SANTAK UPS, the following items should be heeded: 1. Make sure of 2. SANTAK Electronics (Shenzhen) Co. Ltd. never grants authorization in any form to any company to manufacture UPS; 3. Labeled on all SANTAK is an �electronic supervision code� (�electronic supervision code� is a code of product identi�cation advocated by SIQSAQ in order to strike at fake commodities). Inquiry method: Website inquiry: Access the website:www.95001111.com (Product Identification, Authenti�cation and Tracking System) and input the supervision code; Tel inquiry: Call 95001111 to check (you may call 010-95001111 and follow the instructions to enquire the identi�cation); Message inquiry: Send text message to 106695001111 (available to both China Mobile and Unicom); Any questions, you may call the telephone number at 95001111 or log on to www.95001111.com. for further details or lodge your complaints. Copyright Statement SANTAK is dedicated to a continued effort of technological innovation and provision of improved products and services to satisfy customers� needs. Product design and technical speci�cations are subject to upgrading without notice. Actual product may differ from photo. Please access www.santak.com.cn to download the latest version of product instructions. All Rights Reserved © 2008-2009 SANTAK Electronics (Shenzhen) Co., Ltd. Safety Instructions Operation Safety 1. Prior to the application, please read �Safety Instructions� carefully to ensure correct and safe application. Please keep the user manual properly. 2. During operation, attention should be paid to all warning symbols and operations should be followed strictly as required. 3. Equipment is not supposed to be used in environment that directly exposed to the sunlight or raindrops or in humid environment. 4. The equipment should not be installed close to area of thermal sources or any area where there is presence of devices such as electric heaters and furnaces. 5. Make sure the safety space should be left for proper ventilation and product maintenance when placing UPS. Refer to the instructions during installation. 6. Dry and non-conductive items should be used for cleaning. 7. In case of a �re hazard, dry powder extinguisher should be used properly. Using liquid �re extinguisher may result in electric shock hazard. 8. Storey bearing capacity of machine and batteries should be taken into consideration prior to installation. 9. Using this device, please ensure that the load power is match with the rated power of UPS and the battery speci�cations. Prohibitions 1. There is high voltage presented inside the UPS, non-licensed company or technical personnel is not allowed to open the case cover arbitrarily, otherwise there might be a danger of electric shock and loss of warranty eligibility. 2. When applied to the following equipment, please contact the dealer or Santak in advance since there might be special requirements and design for the application, setting, management and maintenance: A�Precision industrial, scienti�c and medical instruments and equipment; B�Equipment that might endanger physical safety such as elevator etc; C�Load equipment with large startup current and negative power; 3. Do not place battery to �re in order to avoid possible explosion.