Savant PAV-SMS2001 Manuals

Savant Music Service Deployment Guide Copyright © 2018 Savant System, LLC 009-1602-00 | 180514 1 of 18 Savant® IP Audio Music Server PAV-SMS2001 Deployment Guide Document Number: 009-1602-00 Document Date: April 2018 Document Supports: da Vinci 8.8 and higher

PAV-SMS2001 | 009-1606-00 | 180108 Copyright 2018 Savant Systems, LLC 45 Perseverance Way, Hyannis, MA 02601 Savant.com | 508.683.2500 1 of 2 Box Contents (1) Savant Music Server with AVB (PAV-SMS2001) (1) Installation Kit (075-0208-xx) (1) 5V DC 3A Power Supply (025-0153-xx) (1) Quick Reference Guide (this document) Specifications Environmental Temperature 32° to 104° F (0° to 40° C) Humidity 10% to 80% Relative Humidity (non-condensing) Dimensions and Weight Height 1.6in (41.5 mm) Width 8.5in (215.0 mm) Depth 3.7in (93.3 mm) Weight Net: 1.4lb (0.64 kg) Shipping: 2.3lb (1.05 kg) Power Input Power 5V DC 3A Max Power 15 Watts Networking Supported Standard IEEE 802.1 AVB/TSN switches IEEE 802.3 Ethernet Regulatory Safety and Emissions FCC Part 15 CE C-Tick RoHS Compliant Front Panel A B Power Status Power LED Green: System has power and is operating normally. Off: System is not receiving power. Status LED Off: Embedded processor is resetting, or is powered up, and is booting the embedded firmware. Green: Host has established communications with the embedded system. Green Blinking: Embedded system is ready, but no communication has been established with the host. Red: Host has determined the firmware needs to be updated, but a problem occurred during the process that will initiate a reset. Red Blinking: Embedded firmware is running, but has not received a DHCP IP Address. Amber: Host is updating the embedded firmware. Amber Blinking: Embedded system has a valid link-local IP Address and is connecting to the host. A B 1s 1s Repeat 1s 1s Repeat 1s 1s Repeat Network Configuration To ensure that the IP Address will not change due to a power outage, a static IP Address or DHCP reservation should be configured. Savant recommends using DHCP reservation within the router. By using this method, static IP Addresses for all devices can be managed from a single UI, avoiding the need to access devices individually. NOTE: Setting DHCP reservation varies from router to router. Refer to the documentation for the router to configure DHCP reservation. Network Requirements The PAV-SMS2001 requires a Audio Video Bridging (AVB) network. Connect all Savant devices to the same local area network (LAN) or subnet as the host. Savant recommends not implementing any type of traffic or packet shaping in your network topology for the Savant devices as this may interfere with performance. Installation The PAV-SMS2001 should be installed on a solid, flat, level surface. The device will fit on a 1U rack shelf. The location should be dry, well ventilated, and out of direct sunlight. For Product Info Savant® Music Server with AVB (PAV-SMS2001) Quick Reference Guide

Copyright © 2019 Savant Systems, LLC 45 Perseverance Way, Hyannis, MA 02601 - 1 - Savant.com | 508.683.2500 Savant® IP Audio Music Server Deployment Guide Document Number: 009-1602-02 Document Date: December 2019 Document Supports: da Vinci 8.8 or higher This document will guide the installer through the process of installing, configuring, and adding Savant IP Audio Music Server to a RacePoint Blueprint™ configuration. – IP Audio Music Server [PAV-SMS2001-XX]