Savant WPB-LV02 Series Manuals

Echo and Metropolitan Style Low Voltage Keypads QRG 1 of 3 45 Perseverance Way, Hyannis MA 02601. Copyright© 2021 Savant Systems, Inc. | 009-2027-00 | 210507 Savant.com | 508.683.2500 ECHO and Metropolitan Style Low Voltage Keypads - Quick Reference Guide Paddle Keypad (WPB-xxLV02-xx, WIB-xxLV02-xx) Dial Keypad (WPK-xxLV05-xx, WIK-xxLV05-xx) Configurable Keypad (WPB-xxLV06-xx, WIB-xxLV06-xx) Products Box Contents (WPB/WIB-xxLV02, WPK/WIK-xxLV05) Box Contents (WPB/WIB-xxLV06) (1) Keypad (faceplate not included) (1) 5-pin Cable Control Station Pigtail (064-0456-xx) (1) Product Regulatory Statement (009-1950-xx) (1) Keypad (faceplate not included) (1) 5-pin Cable Control Station Pigtail (064-0456-xx) (2) Double Height Keypad Buttons (074-0927-xx) (1) Product Regulatory Statement (009-1950-xx) Environmental Temperature 32° to 104° F (0° to 40° C) Humidity 10% to 90% Relative Humidity (non-condensing) Location Indoor Use Only Specifications Dimensions and Weights Length Width Depth Weight WPB-xxLV02 WPB-xxLV06 WIB-xxLV02 WIB-xxLV06 4.13 inch (10.50 cm) 1.72 inch (4.37 cm) .97 inch (2.46 cm) .30 lb. (0.13 kg) WPK-xxLV05 WIK-xxLV05 4.13 inch (10.50 cm) 1.72 inch (4.37 cm) 1.24 inch (3.15 cm) .30 lb. (0.13 kg) Shipping 7.0 inch (17.78 cm) 4.5 in. (11.43 cm) 3.0 in. (7.62 cm) .60 lb. (0.27 kg) HELPFUL! The variation in the depth measurement for the WPK and WIK is due to the dial on the front face. Installation Recommendations Savant recommends as a minimum: – An open-backed low voltage bracket installed on the interior walls and a closed-back electrical box on exterior walls. – An installation depth of at least 1 1/4 inches (3.2 cm). Power Input 24V DC Average Power Consumption 0.5 watts Maximum Power Consumption 1.4 watts Minimum Supported Release da Vinci 9.0 Regulatory Safety and Emissions FCC Part 15 Class B CE Mark RoHS Compliant A B C D D E A B C D D E A B C D E A Ambient Light Sensor - Detects the ambient light level in the room and adjusts the brightness of the button and dimming LEDs. The ambient light sensor is enabled and disabled from the Lighting and Shade manager in Blueprint. B Dimming Level Indicators - The six status LEDs on the front panel can indicate any of the following: – The amount of power applied to the load. The LEDs turn on from left to right as power is increased and switch off from right to left as power is decreased. – The amount of power applied to the load for any scenes created in Blueprint or the Pro App. – The status of the keypad during the setup and provisioning process. See the LED Sequencing section. C Reset Button Press and release - Reboots the keypad. Press and hold - Press and hold for 5 seconds, then release to perform a factory reset. A factory reset erases the keypad’s stored address. D Buttons - Programmable buttons. See the Low Voltage Deployment Guide for instructions on how to program. This guide and other lighting information are available on the Keypad Lighting Documentation Portal in the Savant Customer Community. E Button LEDs - When configured and bound to a Savant system, the LED’s state gets defined by the selection made in the LED Behavior and LED Color fields from within the Lighting and Shade Manager. WPB-xxLV02 WIB-xxLV02 WPK-xxLV05 WIK-xxLV05 WPB-xxLV06 WIB-xxLV06 Front Panel

45 Perseverance Way, Hyannis, MA 02601 Copyright © 2019 Savant System, LLC Savant.com | 508.683.2500 Savant® Low Voltage Keypads PWM-ENC3 | SKL-3040 | SKL-1010 | WPB-xxLV06 | WPK-xxLV05 | WPB-xxLV02 Deployment Guide Document Number: 009-1731-00 Document Date: March 2019 Document Supports: da Vinci 9.0