Savant WPX LV06 Series Manuals

Wireless Configurable Keypad for DMX Control - QRG 1 of 5 45 Perseverance Way, Hyannis MA 02601. Copyright© 2021 Savant Systems, Inc. | 009-2075-00 | 211015 Savant.com | 508.683.2500 Echo / Metropolitan Wireless Configurable Keypad for Basic DMX Control Configurable Keypad - Echo Style (WPX-xxLV06) Configurable Keypad - Metropolitan Style (WIX-xxLV06) Products Box Contents (WPX-xxLV06, WIX-xxLV06) Optional Accessories (1) Keypad (faceplate not included) (1) 4-pin Cable Control Station Pigtail (064-0417) (2) Double Height Keypad Buttons (074-0927) - WPX Only (2) Double Height Keypad Buttons (074-0808) - WIX Only (1) Product Regulatory Statement (009-1950) – One to Four Gang Wall Plates (FIx-0S0xxP) Environmental Temperature 32° to 104° F (0° to 40° C) Humidity 10% to 90% Relative Humidity (non-condensing) Location Indoor Use Only Specifications Dimensions and Weights Length Width Depth Weight WPX-xxLV06 WIX-xxLV06 4.13 inch (10.50 cm) 1.72 inch (4.37 cm) .97 inch (2.46 cm) .30 lb. (0.13 kg) Shipping 7.0 inch (17.78 cm) 4.5 in. (11.43 cm) 3.0 in. (7.62 cm) .60 lb. (0.27 kg) Installation Recommendations Savant recommends as a minimum: – An open-backed low voltage bracket installed on the interior walls and a closed-back electrical box on exterior walls. – An installation depth of at least 1 1/4 inches (3.2 cm). Power Input 24V DC Average Power Consumption 5W Maximum Power Consumption 12W Maximum Wiring (DMX keypad to DMX Driver ) #20 AWG 328 feet (100 meters) #18 AWG 492 feet (150 meters) #16 AWG 618 feet (188 meters) #14 AWG 984 feet (300 meters) Minimum Supported Release da Vinci 10.0 Regulatory Safety and Emissions FCC Part 15 Class B CE Mark UKCA RoHS Compliant A B C D E A Ambient Light Sensor - Detects the level of ambient light in the room and adjusts the brightness of the button and dimming LEDs. The ambient light sensor is enabled and disabled in Blueprint’s Lighting and Shade manager. B Dimming Level Indicators - These LEDs can indicate any of the following: – The power being applied to the load. The LEDs turn on from left to right as power is increased and switch off from right to left as power is decreased. – The power being applied to the load from any scenes created in Blueprint or the Pro App. – The status of the keypad during the setup and provisioning process. See the LED States section. C Reset Button Press and release - Reboots the keypad. Press and hold - Press and hold for 10 seconds, then release to perform a factory reset. A factory reset erases the keypad’s stored address and removes any assigned IP Addresses. D Buttons - Programmable buttons. See the Low Voltage Deployment Guide for instructions on how to program. This guide and other lighting information are available on the Keypad Lighting Documentation Portal in the Savant Customer Community. E Button LEDs - When configured and bound to a Savant system, the LED’s state is defined by the selection made in the LED Behavior and LED Color fields in the Lighting and Shades Device Manager. Front Panel Quick Reference Guide