Schiit Fulla 3 Manuals

HI. I’M FULLA J U S T P L A Y I N ’ 4 Preamp Output. Plug this in to your powered monitors (or a power amp) using a 1/8” TRS to dual RCA cable (for most products­—others may need different cables, consult the manufacturer.) For line-level output, adjust the volume knob on the top of the Fulla 3 to the 3:00 position. 5 Analog Input. If you’d like to use your Fulla as an amplifier for another analog source (like, if you 1 Volume Knob. Turn up til you smile, but not until your ears bleed. 2 Microphone Input. If you’re using a headset microphone, connect it using the pink plug on the Y-adapter that is usually included with your head- phones. Do not use a TRRS jack; it will not work. Note: Some games will need you to set sound preferences for best results. See schiit.com/guides/gaming for more information. 3 Headphone Output. Plug your headphones in here. If you are using headphones with a headset microphone, plug the green plug from the Y-adapter that is usually included with your headphones. Do not use a TRRS plug; it will not work. 1 2 3 FULLA 3 CONTROLS & CONNECTIONS still have a phone with a headphone jack), plug it in here with a 1/8” stereo TRS plug. 6 USB Power Input. If you get a “this device draws too much power” error, or if your source doesn’t “see” the Fulla, connect this input to 5V DC at 500mA or above with a micro USB cable. Your phone charger may work just fine (if it uses micro USB connectors, that is.) 4 5 6 7 7 USB Power and Data Input. Connect this to your computer or other USB source using the provided micro USB cable, or with another USB 2.0-rated, high-quality micro USB cable. FULLA 3 OPERATION Most modern devices won’t need drivers, but if you’re still using Windows 7, drivers are available at schiit.com/drivers Select “I’m Fulla Schiit” in Control Panel/Sound Devices (PC) or in System Prefs/Sound (Mac.) Play some music (some music players will have to be set to “I’m Fulla Schiit” too.) That’s it! Enjoy the game—or some music!