Schuler Scientific NTEP A-Series Manuals

NTEP A-Series Start up Guide Balance Series 1. CONTENT Weighing pan x 1 Balance x 1 Power adapter x 1 Draft shield x 1 Bottom insert x 1 Models: SAS-224.N | SAS-314.N Weighing pan x 1 Balance x 1 Power adapter x 1 Draft shield x 1 Grounding foot x 1 Foot x 3 Models: SPS-213.N | SPS-363.N | SPS-1003.N Weighing pan x 1 Balance x 1 Foot x 3 Grounding foot x 1 Models: SPS-2102.N | SPS-3502.N | SPS-4502.N Power adapter x 1 2. WORKROOM AND BASIC OPERATION GUIDELINES 3. UNPACKING Place the balance away from heat sources. Avoid exposing the balance to the sunlight. Avoid air drafts and air movements at the workstation. Avoid exposing the balance to a magnetic field. Do not weigh magnetic substances. Make sure that the balance is placed on an even surface. Do not place the balance in a hazardous area. Do not weigh explosive materials. Do not place the balance on an unstable ground exposed to shocks and vibrations. +104oF +40 oC +50 oF +10 oC Operate the device in a room where the temperature ranges between 10–40 °C (50–104 °F) and where the relative humidity is below 80%. Place the balance on a solid surface to ensure stability. To obtain stable and repeatable weighing results, an anti-vibration table is recommended. Keep the packaging should a warranty claim or service be required. TOP 1 2 3