To the owner or user: The service manual you
1
This ice system is designed to be installed
3
KSNM30 STACKING KIT INSTRUCTIONS
5
FOR THE INSTALLER: Final Check List
8
1. Remove the front, and left side service
9
Control Box: Contains the electrical controls
10
COMPONENT DESCRIPTION: Control Box
11
Evaporator: A refrigerated vertical tube filled
12
Refer the wiring diagram as needed.
13
Water enters the machine through the 3/8"
14
Beginning at the compressor, the refrigerant
15
Disconnect electrical power before
17
In some installations the water supply to the
18
STATUS: GEARMOTOR OPERATES, COMPRESSOR DOES NOT
21
SERVICE DIAGNOSIS: Condition - Low Ice Production
22
1. Shut off the water supply to the icemaker.
23
REMOVAL AND REPLACEMENT: Bearing And Breaker
24
Disconnect the electrical power to the
26
To Replace the Evaporator:
27
To Remove and Repair the Gearmotor
28
REMOVAL AND REPLACEMENT: Gearmotor
29
1. Unplug “water sen” connector from control
31
