-
This is the manual for the SCOTSMAN MAR
1
-
The standard machine includes a stainless steel
2
-
* Adapter shipped inside unit to go to 3/8” male
3
-
Set for Fresh water Operation
4
-
Each MAR1400 or MAR2000 is an “Evaporating
6
-
Complete System Installation
7
-
Condensing Unit Component Control Devices
8
-
WARNING - MAR SCALE ICE MAKERS are not
9
-
MAR1400 & MAR2000
10
-
The ice machine must have an adequate water
11
-
MAR SPLIT UNIT - UNPACKING AND
12
-
1. Remove bin thermostat bulb from its shipping
13
-
1. Install the ice chute.
14
-
The supply power, voltage frequency and phase
15
-
In a multiple installation various types of
16
-
COMPLETE SYSTEM LEAK TESTS
17
-
Follow the manufacturer’s start up check list.
18
-
After power has been connected, because the bin
19
-
Water and Refrigeration Schematics
20
-
MAR Split - Electrical / Refrigeration
22
-
The procedures provided in this section are
24
-
Adjustment & Removal & Replacement Procedures
25
-
7. Loosen the last screw to remove the seal
26
-
13. Place trust washer with teflon coated surface
27
-
20. Place the the S.S. Ring on the shaft end
28
-
Maintenance & Cleaning Instructions
30
-
1. Disconnect power front the unit.
31
-
The Service Diagnosis Section is for use in aiding
32
-
MAR101 & MAR121
33