To the owner or user: The service manual you are
1
FOR THE INSTALLER: Location
4
1. Remove the front and side service panels.
8
COMPONENT DESCRIPTION: Control Box
10
Refer the wiring diagram as needed.
12
Water enters the machine through the 3/8" male
13
Beginning at the compressor, the refrigerant is
14
1. The bin control uses devices that sense light,
16
5. Clean the air cooled condenser.
17
In some areas, the water supply to the ice maker
18
STATUS: GEARMOTOR OPERATES, COMPRESSOR DOES NOT
21
SERVICE DIAGNOSIS: Condition - Low Ice Production
22
1. Shut off the water supply to the ice maker.
23
REMOVAL AND REPLACEMENT: Bearing And Breaker
24
To Remove the Water Seal:
26
To Replace the Evaporator:
27
To Remove and Repair the Gearmotor
28
Removal and Replacement: Refrigeration System
29
1. Unplug “water sen” connector from control
31
